zeraldo 11
zeraldo
@zeraldo_690787
published a new model December 9, 2024 at 4:42 AM
December 9, 2024 at 4:42 AM

ABS
no support
0.15mm layer
4 walls
no infill

Ctrl + Enter to send Enter to add a new line
zeraldo 11
zeraldo
@zeraldo_690787
published a new model August 4, 2024 at 10:44 AM
August 4, 2024 at 10:44 AM

PETG
0.3mm layers
4 walls for the front bumper and 8 walls for the kickstand
25% infill for the front bumper and 50% infill for the kickstand
no supports

as it turns out, the front bumper also serves as a kickstand, although not as stable as the actual kickstand

double-side tape was positioned on both side “wings”, to add extra grip and stability.

Ctrl + Enter to send Enter to add a new line
zeraldo 11
zeraldo
@zeraldo_690787
published a new model July 12, 2024 at 11:15 AM
July 12, 2024 at 11:15 AM

Ctrl + Enter to send Enter to add a new line
zeraldo 11
zeraldo
@zeraldo_690787
published a new model April 13, 2024 at 4:43 PM
April 13, 2024 at 4:43 PM

PETG
0.3mm layers
no support

Ctrl + Enter to send Enter to add a new line
zeraldo 11
zeraldo
@zeraldo_690787
published a new model March 2, 2024 at 1:14 PM
March 2, 2024 at 1:14 PM

0.15mm
4shells
20% infill
ABS/PETG
supports

Excellent work. One question: how does each piece come together?

@XFernandez_1944541 Hello and thanks!
via two elastic strings, one linking the upper members to the torso, and the other one linking the base, lower limbs and torso.

Ctrl + Enter to send Enter to add a new line
zeraldo 11
zeraldo
@zeraldo_690787
published a new model February 10, 2024 at 5:36 PM
February 10, 2024 at 5:36 PM

0.15mm
4 walls
20% infill
ABS
easyprint version
no supports

0.15mm
4 walls
20% infill
no supports
PETG
"long" version

Ctrl + Enter to send Enter to add a new line
zeraldo 11
zeraldo
@zeraldo_690787
published a new model January 30, 2024 at 1:32 PM
January 30, 2024 at 1:32 PM

0.15mm layer
4 walls
20% infill
no support
4mm skirt
ABS

Ctrl + Enter to send Enter to add a new line
zeraldo 11
zeraldo
@zeraldo_690787
published a new model January 6, 2024 at 5:27 PM
January 6, 2024 at 5:27 PM

Ctrl + Enter to send Enter to add a new line
zeraldo 11
zeraldo
@zeraldo_690787
published a new model January 6, 2024 at 5:24 PM
January 6, 2024 at 5:24 PM

Ctrl + Enter to send Enter to add a new line
zeraldo 11
zeraldo
@zeraldo_690787
published a new model November 13, 2023 at 12:46 AM
November 13, 2023 at 12:46 AM

Ctrl + Enter to send Enter to add a new line
zeraldo 11
zeraldo
@zeraldo_690787
published a new model November 12, 2023 at 6:47 PM
November 12, 2023 at 6:47 PM

Your design would be great for a cheap trolley handle. Just add a hole/cylinder on top to put the stick in to the mount vertical. Might try to remix it when I get my A2 but for a broomstick instead of the selfiestick. Must learn to design first, haha..

Ctrl + Enter to send Enter to add a new line
zeraldo 11
zeraldo
@zeraldo_690787
published a new model November 10, 2023 at 5:37 PM
November 10, 2023 at 5:37 PM

PETG
0.15mm layer
support - yes
infill 20%
4 walls

Ctrl + Enter to send Enter to add a new line
All items loaded