Very Nice Dice Tower, thanks for sharing, i love it! Printed in PETG 75% Infill.
700g of Rock Solid Dwarfen Power.

It was long overdue, I set up my Club. You'll find my newest models there.
Updated the Bergfried supporter edition. Now with prepainted multicolor file for XL and MMU.
https://www.printables.com/model/913076-bergfried-dice-tower-supporter-edition-modular
Very Nice Dice Tower, thanks for sharing, i love it! Printed in PETG 75% Infill.
700g of Rock Solid Dwarfen Power.
Parts are a bit too tight, I had to use a heat gun before assembly.
Tower looks amazing! Thanks!
Glad you like it. Maybe try some negative XY compensation to expand the tolerances.
Printed in PLA Galaxy Black, some parts fit loosely, others fit very tightly, works even with the larger Metal Dice and Sharp Edge Resin Dice.
Printed the bayonet version. (edited)
There aren't enough multi-player dice towers. even fewer that recognize the bestagons status.
@KuromanKuro_1054244 I hear the voices, I'll bring the bestagons.
Make sure you set the max angle for the supports to around 25 otherwise they can get gaps. also set your supports to dissolvable so they don’t detach.
@KarlWooster_935691 Oh I just checked, you used an Anycubic machine, so I guess you're using Cura and not Prusaslicer. The presets are for Prusaslicer. And I found that they depend on the printer model. So I made two versions, one for the new mk4 and one for mk3. So I guess writing down the values will not work the same way on other machines or slicers.
@wuerfel nope, I'm just an idiot and hadn't yet figured out that the 3mf contained that information; also, I've added the printers I do have access to. Thanks again!
This is my first print with embedded magnets and also the first dice tower I have been really excited about. I had some magnets on hand so used them. They were not as strong as I would have liked after getting the tower built. I printed the triangular posts flat on the bed and ended up having to reduce the length by 30mm. I also had to reduce the posts to 96% height and width and they were still very tight going into the base and top. Overall I love the results and look forward to building it again with some stronger magnets.
@wuerfel Are the magnets in the top part repelling or attracting the top segment? I have them repelling because I didn't want the top segment to attach to the top part
@CoryIsakson_589261 yes repelling. That prevents the top ones from tilting.
What size magnets does it need?
@GiraffeCookie_963722 oops I forgot to mention the size. It's 6mm diameter 3mm height
Any chance you could post the design files or a longer base?
@wuerfel Looks perfect. Thanks a ton!
@Mike_513967 you're welcome and I'd love to see some pictures of your results.
@Mike_513967 sweet. Thank you for sharing. Enjoy your games.