W 12
warpster
@warpster
published a new model January 3, 2023 at 6:32 PM
January 3, 2023 at 6:32 PM

Printed in PLA, cut six 16” length 3/4” dowel rods and painted them black. Was a tight squeeze after the paint (needed to rubber mallet them in) but it came great and feels sturdy. Definitely helped solved my storage issue

Ctrl + Enter to send Enter to add a new line
W 12
warpster
@warpster
published a new model December 19, 2022 at 5:06 AM
December 19, 2022 at 5:06 AM

Buttons work great. Just a warning, though. Had an (unrelated) issue with one of my first stage feeders and Bambu said because I "modified" my AMS with these buttons, my warranty is now void.

View 6 more comments

@LittleMike_488 Probably shouldn't have told them about the buttons :(

@DKCP22_298256 I didn't. They saw them when I took video like 12 times for them.

They work great when the roll is full, however as soon as the roll gets low, I'm finding they're causing too much tension and they immediately get pulled off the button and snag, preventing the AMS from working

Ctrl + Enter to send Enter to add a new line
W 12
warpster
@warpster
published a new model December 13, 2022 at 9:18 PM
December 13, 2022 at 9:18 PM

@PavelS_1648828
Purely by chance I saw this motor on AliExpress https://www.aliexpress.com/item/1005003480074662.html?spm=a2g0o.detail.pcDetailTopMoreOtherSeller.1.5c42e37fI2yz0O&gps-id=pcDetailTopMoreOtherSeller&scm=1007.40050.354490.0&scm_id=1007.40050.354490.0&scm-url=1007.40050.354490.0&pvid=cac45e3a-3f97-4e3a-931e-400ea67a98b0&_t=gps-id:pcDetailTopMoreOtherSeller,scm-url:1007.40050.354490.0,pvid:cac45e3a-3f97-4e3a-931e-400ea67a98b0,tpp_buckets:668%232846%238110%231995&pdp_npi=4%40dis%21CZK%2153.81%2134.52%21%21%212.26%211.45%21%402101eeda17109600646667604e0d17%2112000025975341318%21rec%21CZ%214835152244%21&utparam-url=scene%3ApcDetailTopMoreOtherSeller%7Cquery_from%3A

Ctrl + Enter to send Enter to add a new line
W 12
warpster
@warpster
published a new model November 23, 2022 at 7:18 PM
November 23, 2022 at 7:18 PM

Still to this day my favorite. ❤❤❤

I like these. I print these without supports and it comes out cleaner than with supports. I will be keeping these in each spool even when stored and have been printing the grid part in the same color as the filament on the spool.

Ctrl + Enter to send Enter to add a new line
W 12
warpster
@warpster
published a new model October 28, 2022 at 3:33 AM
October 28, 2022 at 3:33 AM

I built this mostly with hardware out of the parts bin, including an SKR 1.4 Turbo and Mini12864 screen.

A focus was to keep everything as compact as possible, so I modeled a bevel gearbox to keep the Nema23 motor as tight to the frame as possible. Electronics enclosure was modeled to stack the SKR on top of a MeanWell LRS-150-24 power supply. The base of the electronics enclosure features several dividers to create 'chambers' separating and isolating 240v and 24v. The upper enclosure covers the lot including a TMC2160 OC motor driver. A 40mm fan is also fitted, though doesn't seem necessary.

Everything works, though there are some peculiarities. Filament checks work fine however when the end of the spool is reached, the spool will still rotate 2-3 times before halting and locking up Marlin (not a full reset). @warpster Possibly related to disabling interrupts in MarlinCore.cpp? (Update - Almost certainly related to interrupts, the SKR 1.4 Turbo does not have any endstops connected to interrupt enabled pins. Still suspect that the spool motor should be capable of stopping faster than it is though.) I've also noted that the spool slows as the slider reaches the limit of the spool width; not necessarily an issue but not something I've seen in any of the videos. (edited)

View 10 more comments

@digital_recon_792783 Sorry, I don't have a RAMPS board to know for sure. Looks like it needs an LCD adapter board.

@CaptainSandwi_523915 Thank you for the reply. I found the adapter. It appears to be included with the display recommended by Warpster.

Salut, entrainement complètement remixer, 2 poulies et une courroie, le NEMA 17 fait très bien le travail, support droit remixer aussi pour s'adapter au nouveau support moteur, j'ai préféré l'écarter un peu plus du distributeur. Je suis en train de refaire la programmation complètement pour ne pas être sur une base marlin. Une fois finit je partagerais.

@Seb_Juju_276193 Jai aussi remodéliser la béquille de début et de fin course, beaucoup plus pratique une fois rabattu.

@Seb_Juju_276193 Allo as-tu réussi a refaire la programmation? Je suis intéressé à voir le résultat. Merci.

Ctrl + Enter to send Enter to add a new line
W 12
warpster
@warpster
published a new model September 20, 2022 at 11:44 PM
September 20, 2022 at 11:44 PM

I used https://www.amazon.com/dp/B08D3GKDSX?ref=ppx_yo2ov_dt_b_product_details&th=1 for the LED Strip. It includes power supply. I took apart the 24V Light Controller box, unsolvered it from the LED strip, soldered on 3 wires to then solder onto the rest of the strips inline. That way I have a controller attached and the remote works even when the controller is in the rear of the LED Frame.

Ctrl + Enter to send Enter to add a new line
All items loaded