Tlač PLA tryska 0.4 vrstva 0.20 perimetre 2 výplň 20% gyroid. Čas 1h 57m , 72g.
Works ok. I had to heat up the clip sides and squeeze them a little so they would actually snap in. The sockets were too loose on my print.
Not tight enough at the closure ends. They don't hold well and the clip is way too lose to be useful. But a bit of heat did help. Maybe a slight change to the female part (half circle shape) to make it perfect. (edited)
It's a nice idea but I think needs fit adjustments. I made one of each size, using PETG on a Core One that's working very well on other things I print. The hinge is somewhat looser than it needs to be and the clamps didn't hold at all, so I tweaked them with pliers.
Used this to stress test my printer.
Got 2 rings moving after 3-4 hammer shots xd
Thanks for this lovely model. PLA Aurapol Galaxy black and Spectrum Premium Golden Line.
Stupid question, how do I get the individual parts from the stl file? It opens as one whole piece thst prints as a single unit. Cura won't let me open 3mf files.
@mora2000_3074575 I finally worked this one out yesterday. Try downloading Bambustudio, that actually allowed me to open the 3mf files. I could then save the seperated pieces as an STL and import to cura to slice
printed the 9cm one, added another 20% and still turned out great!
Thank you.
Good item. Thank you