Hallo Der USB -A Adapter ist 39x15x7mm
Gruß Willi :-)
@WiBo_2470420 Danke! Hast du ein foto für mich? (edited)
Printed smoothly with the currently typical XL stringing, but very brittle. Some edges were starting to break apart just when lifting off bed. Will try doing the solid version as well or making the outer walls thicker.
This printed really well and I love it! So much tidier for the many many whistles I print when checking the printer / filament setup.
Two ideas:
1. I intend to put this on my desk with a sign saying 'free - please take one' but the area for the whistle is very tight and I had to use a knife to pry a couple out. The actual compartments could be (ever so) slightly wider.
2. It would be great to have 4 / 6 / 8 compartments as an option for displaying all colours.
LOVE IT!
@SusanCollins_1642080 for (1) how about just scaling the model up by 1% or 2% in the slicer?
Cute! Using this for my electronics bench. No trouble printing in white sunlu abs in about 40 min, though I got distracted and forgot to dry the filament properly so I have a little stringing.
Easy to print, fits well with my sponge and overall great design. keep it up buddy.
@Slymahkdoum_532488 Thank you for your review! That was one of my first design, has some issues that could be easily improved.. Thanks for the motivation !!
@thbo hope to see the improvement. you're welcome!!
This was my beta test. It works well! I also printed just the dock without the wall mount to see if I could add it to another location as I have to keep 3 apple watches (sometimes 4) charged at once. So far I've not been able to figure out how to combine them
@tpnd Printing in two parts make a really great result ! Nice work (edited)
I ordered these https://a.co/d/gOa3ZkR for my MagSafe print in place project. I haven't posted it to printable yet -- https://www.thingiverse.com/thing:6827483. However, I'm looking forward to printing this. Also, one thing I found helpful to increase the strength of the magnet, was to limit the space between it and the phone. (edited)
@JonSowell_2585464 Thank you for this magnets! Unfortunately, I can't deliver this item to Switzerland... I'll look for an alternative. If you can give me the exact dimensions of this piece I'll make an alternative print for you if needed