Tim is one of the best if not the best FPV drone mount designer in the entire FPV community. I've used his designs since o3 and gotta say, this new o4 Pro Pod and Antenna Mount not only came out perfect out the printer but fit my AOS 5 EVO frame just right. With most frame manufacturers struggling to accomodate the new O4 Pro camera mounting, it is a relief that a quick print and a 2-minute installation can get you in the air with maximun protection and no props in view. (edited)
Fantastic design and designer. Tim is a super generous wizard. This is his ultraclose O4 Pro pod for the Flywoo Explorer LR4 O3
This is my Action 4 mount for the speedybee master 5 V2 frame. I am incredibly pleased with how well it turned out, especially given it's my very first attempt at 3D printing.
The print came out clean and precise, with no major issues. The camera mount fits perfectly on my drone, and it holds the camera securely in place. I used black TPU and printed at 30% infill. The design is robust and seems to handle vibrations well during flight.
Thanks to Tim for this excellent model! Looking forward to more 3D printing projects in the future.
The print came out nice and the design is amazing. The camera fits perfectly, slides in and out with no trouble, and stays securely. Tim returned with the stl file within a day which was super nice. Very great design
hi, can this cover also be used with ace pro 2?
Perfectly designed case!! Protects the camera, lens, AND the ND filter!! No case is visible in camera view. And the cut out for the screen in the front is perfect. The back is thick for extra screen protection. And the shell of the case has slots to snip to have the perfect opening for the SD card and battery doors!! Incredible design <3
Hey, look like a nice model.
I would to use this as a base to model something I can use for my Nexx x wed 2 helmet. Are you willing to share the STEP file with me?
Thank you in advance!
Nice design, all printed with ease. Made with Yousu TriColor Red/Gold/Blue and octogram spiral as top layer.
This lens protector is AWESOME!! I made it for my Pavo 20 and It works great! I paired it with the camera mount extension I found from Magic Aerials and it works like a charm!
Thank you so much Tim! It fits the O3 camera like a glove and between the camera mount plates of an Apex Evo perfectly. This protector ain’t going anywhere no matter how hard you crash 😂 This should come in the box with all O3’s.
An essential, universal fit, protection hood for our precious O3 camera lenses. Work perfectly and absolutely nothing in view 🙌
ImpulseRC Apex EVO DC with dual SMA, GOKU Mini V3 GPS, and ELRS 2.4G dual dipole-T (vert/side+horizontal) all as a single well-integrated print that mounts seemlessly in the 20x32mm rear section. A lot to pack in, but Tim's design made it happen - Thanks again :) (edited)
Nazgul 5 V2 / XL5 Frame
Absolutely incredible, and Tim one of the best people I've come across in 3D Printing. Fits perfectly, easy to print and camera slides in from the back. No jello issues whatsoever and I fit random chinese ND filters from Aliexpress, great stuff
Made the antenna mount in esun PLA, GPS mount still in progress for the matek m8q.
AOS LR5 with M8Q-5883 GPS on the top and T-antenna mounted on the bottom. This is the centerpiece of my quad.
Awesome design Tim. Just awesome. This much needed fix forced me to finally buy a printer and learn how to print!My new Ender 3 S1 Pro printed all the high temp materials without starting a fire, although I had 4 early misfires with the HTPLA (which taught me about proper bed adhesion). Then the nylon wheels kept coming out over the mark before learning about the importance of drying and flowrate cubes (thanks Francois on the telegram forum!). Overall really happy for the problems because they most certainly taught me best practices.Finally got the wheel back together last week, and man what a difference. The suspension works even better than it did day 1, and I can hear the difference too. I also installed the two longer suspension arm bolts, at 220lbs I think I'll be needing that 850lb coil pretty darn quick.Fantastic print design and updating of the project. CHEERS to you Tim!
Beautiful documentation, prints, and setup @TimmyTimTim_434740! Great job and thank you for sharing!
Excellent design and even better results!
Printed with Hatchbox performance PLA.
First photo is post sanding and after 200 miles. Last two were the assembled sliders prior to installation.
After 200 miles, they still work incredibly well and I only noticed very minor signs of wear.
I plan on changing the wheels to TPU eventually and will update with the results.
Excellent work! (edited)
5mm blue TPU base with 75% cubic infill fob for strength under the bolts holding the handle to the wheel then 18% cubic infill as recommended worth orange TPU then I dripped some flexible metallic blue paint into the embossed name on the top.
Best canopy for micros using o4 lite hands down!! I really recommend it for those terrified to break their o4 lite.
This little canopy for the DJI o4 lite saved me from so much frustration. The o4 lite is known to be very jello / vibration sensitive, I tried 4 other canopies before this one and every single one had issues with jello or didnt look durable at all. I even broke a mipi cable with one of them. I ended up using this canopy together with a mount for the VTX chip, and it works great!! Zero jello indoors and outdoors! If you add Gyroflow stabilization, even better looking! (edited)
Wow, @jpfpv_817104, amazing and so great to hear!