Works great! Just made the driver %100.5 bigger
Love Theese Things , i test fitted one before running of eight pieces for friends and family, in petg , the bit holder didnt really inspire confidence , it was a little loose , so i printed another one at 102 percent and it was too tight , 101 Percent ,but only on the Bit holder, the rest at 100 ,works Perfect thank you sir , you are a scholar and a gentleman , God Bless you
I print with Inland Asa for weather resistance. I printed at a .24 layer height and 15% infill. The threaded parts fit together perfectly, and it has a nice weight to it. Thanks for a useful model!
Fits perfect and works great. Thanks for sharing!
Printed on an Anycubic Vyper using YOUSU Silk PLA 1.75 filament.
Hatchbox PLA in just over an hour. Clean print with no supports. Thanks for adding the STL file. Super basic but gets the job done.
1
@Marchocias_330961 That blue looks great. Thanks for sharing!
Love this little screwdriver. I think this will be very handy to have. I haven’t been able to use it yet as I haven’t bought the bits for it (and don’t seem to have any laying around).
The big blank face seemed to be calling for some personalization, so I added the Aperture Laboratories logo. (And because it prints vertically, it has a LOT more detail than if it were to be printed horizontally.) Then I realized it needed a color scheme to match so I split the handle and printed it in two colors, which I then glued together.
And all of the personalizations/modifications were done within PrusaSlicer! No messing around with STLs (or 3MFs in this case) needed.
Prints quick and works as intended. Printed for the whole family and extended it for my mom with extra features
Simple and yet awesome!
*Please ignore the black tape on our syringe, the numbers keep getting rubbed off
