A must-have for the Stealth Press Zero! Insert fits way better than the original.
Works great printed with PETG, spool sits very stable, a little bit loose fit when printed on P1S but overall good upgrade.
No idea if 95A TPU would have worked, used PETG instead, I'll give them a layer of masking tape or a brush of silicone if they turn out to be too slick.
They print perfectly and the bearings are a tight fit.
View 3 more comments
@ressu Got it, thank you, I'll run these PETG ones for a while, see if they do need any change.
If I print another spool holder I'll give TPU a shot.
@ressu PETG is indeed too slick, plastic spools just glide on them, wrapping the rollers in masking tape fixes the problem.
I printed it with a few modifications, I will upload my stl to the remix section in case somebody needs it.
View one more comment
@ressu Wow, I didn't think of the ground mark. I will paint + and - with a marker on my enclosure :)
Thank you, I made the case, I like almost everything. Maybe the hole for USB Type C could be a little smaller. Maybe a slightly deeper groove for the parts to connect better. But it's a great model.
Hey, ressu, thanks for the great design. Would you mind sharing a step version to make mods easier? I would like to use different electronics and would prefer to edit in fusion360. Will publish of course as remix with step files alongside. Thanks!
@Crosslink STEP file added
