Thank you very much! So cool!
Works perfekt.
Printed in PLA orange and grey to nearly match my Seqtrak. (edited)

Thank you very much! So cool!
Works perfekt.
Printed in PLA orange and grey to nearly match my Seqtrak. (edited)
@Malte_621727 Looks great with the matching grey and orange, good idea! Glad it works for you!
Much better than just letting the leads hang out. But it ended up actually making my cables tighter. They must not have great QC on this wiring. I had issues with the hole provided in the lower bracket. My M2 screw was too narrow to grip, but my M2.5 head was too large to fit in the recess provided. I ended up just using adhesive for now.
@jrsone_628298 It's not a design problem, it's likely the lighting kit. I converted my MT10 into an SC10 so I bought the bumper, chassis, and light kit from team associated separately. They didn't provide any screws to mount them so I was just working with what I had around. And the cable total length is just long enough, but the distance from where the two LEDs split from the main cable is tight. So that's a build length issue from TA. Thanks for the model!
@RandomMistakes_45691 got it. That's a pain. Well for what it's worth, these are the M2.5 screws from Amazon I used with the tail light bracket, and they have been handy to have around for other RC-related things: https://a.co/d/0QRew9G
Very snug fit, I printed with PETG with like 5 walls. Seems very sturdy! I had to deburr the holes to make them fit. Thanks for the model, saved me $25!