@Kela where do you need Support??? That it doesnt touch the plate is my fault, i uploaded the wrong file, but my Bambu printer doesnt Need any Supports. There is a littel bridging but its doable for every (modern) printer. And perhaps its your printer (and / or filament) that is so bad.

@jet_maker_ i can print it fine, but usually the darker blues are overhangs and often are printed MIDAIR, hence the need for support.
ofc your whambu can do it. so can any printer. not bambu related.
nevertheless it's pprettier if done prober

@Kela a good printer can do it without support. so he can say that

@dark_phoenix ofc. but the finish it just not as good, as its overhangs. bridges can be much better.
and i can also say: no it needs support as the finish matter for me, nothing wrong with both statements

@jet_maker_ Yes, thanks, that explains nicely. I'll give it a try again after the holidays. Though I'd be interested how you glued the pieces of the railing together while bending it into a circle.

@flameburst_491537 Since I sold the lighthouse, I can't take any more detailed photos. To bend the railing, I used warm water (approx. 70°C), put the parts in it for a short time, then bent them into the right shape and glued them together with superglue.

@George_Dalli Nice print!!

@JeanDidierst_2304165 I will share my print settings in the next two weeks, but it will not help you, because the Mega X is an old and very simpel printer. It doesnt work on Bambulab A1 for example, even with Mega X settings .
My best advice for the moment is to use Cura if possible, and try out some smaller string-art objects first. If they came out good the lamp should work too.
JM

@Ri3del wollte ich nicht machen

@dark_phoenix Würdet ihr bitte so freundlich sein und irgendwo anders über mich lästern, am besten da, wo es keiner mitbekommt.
DANKE!