This article is all about building your lunch box FluidNC pendant. You are going to need your printed parts, soldering iron, screw driver(s) and your sourced parts according to the BOM.The estimated time to first signs of live, is going to be roughly

How it feels to be a first time buyer, how to purchase a printer at Prusa3D and how to get tricked by your long time favorite 3D printer manufacturer .
First of all, I already own and use Prusa printers. They are my daily drivers, my workhorses basic

This is about making an anemometer from scratch, helplessly overengeneering it and having fun with a ton of boring napkin maths needed for this. 
Along the following journey i learned a lot about designing and claibrating anemometer. I encountered a

Lets talk about prototyping with (FDM) 3D printers, the inevitable failed prints, taking wrong measurements and all the tight tolerances.
Working on a recent project, a RC Willis Jeep, i had to do a lot of test prints. While the pile of plastic grew

This is about geting an used Prusa XL and taking it only for satisfying personal needs. Clearly this is just a maintenance guide! No, you are the weirdo!

Hey hot stuff! Its going to be heated underneat those sheets. Let me grab you by the hand, close your eyes and feel the cozy warmth, emanating from my XL bed. But dont touch anything! (…jet), you might get burned! No seriously, please dont touch the

Have a seat, grab a drink and listen, while i try to form some coherent thoughts about how i got a Prusa XL, why it happened to be a Prusa in the first place, how I started out with 3D printing, a valuable lesson in human factors, buyers remorse and