Decided to try a 3-color version. It turned out very nicely! Thanks.
Should help a lot with installation now that I’m done. If I had checked first on remixes I’d have probably merged this header and the other screw in brackets from @Steven_36669 's https://www.printables.com/model/110081-sheet-holder-with-eject-button-mounting-brackets
I printed this so it could go on the side of the cabinet I use for my printer and it really helped by giving room for my fingers.
I printed this in ABS on the Bambu with AMS - for Heat Miser I had to swap 2 of the colors in the AMS mid print. It would be useful to add to the description that for Heat Miser the color changes are at 0.8, 1.2, 1.6, 2, and 2.4mm. For Snow Miser they are at 0.8, 1.2, 1.6, and 2mm.
@sprior fantastic makes! The layer heights for colour changes are shown in the photos section - I took screenshots of the PrusaSlicer settings to show the heights and colours I used for both 0.4mm and 0.25mm nozzles. I'll update the description to make this more clear. Thanks for sharing your makes and your feedback!
@fasteddy I managed to miss noticing it in the pictures, I actually downloaded the gcode and searched for the tool changes and Z move right after so I guess I did it the hardcore way. BTW I blame you because I bought a spool of clear ABS just for these prints :-)