Printed in PC Blend CF, just like all the other plastic parts of my MK4. Looks great and I really like that it is just clipped on - that's a much better approach than bolting the part onto the extruder.
Printed at a 45 degree angle with organic supports. Printed well with only a little roughness on the supported edges (as expected).
Scaled it down 75%, and it a perfect sized bowl for our puppy. Printed with Bambu Silk PLA with .2mm layer heights from a .4mm nozzle. 15% infill for the base of the bowl and 4 walls for strength. Took about 3 hours.
Printed as beer tokens for a private corporate function. Standard settings, 210 nozzle, 60 bed, 100mm/s and scaled to 125%
Was a bit tough to get it to install, but managed. Haven't seen much difference to print quality yet, but like the idea, and it's quite light.
Used the V2 tweaked deflector. Works well at deflecting the air up away from the bed. Used PETG, 0.2mm Using Organic supports on the one wall only. See picture. Remvoed the heatbreak fan, loosend the 3 nextruder mount bolts just a little to allow it to snap in. Then tightened bolts and remounted the fan.
Printed in two-tone-filament (PolyMaker). Works very well und turned out quiet amazing.
Thanks for the model.
Printed on my MK4 with a 0.4 nozzle at 0.10 quality mode in Prusament PETG & it fits perfect! Also the fan cover fits like a charm!
On my Mk4 the version 2.0 is a bit to long, i use them in the original Prusa enclosure. The mounting is different, i Print some new ones, 90mm in my case.
@Otty_Skipper_411922 ok, thanks for the input - i´ve uploaded a shorter version
Can hold a Pixel 8 Pro nicely.
Printed the single colored version with mini.
I used a pla from das Filament
This is not your original model - stolen from my profile on Maker World without attribution or identified as a remix - and has been reported.
https://makerworld.com/en/models/127277#profileId-137702 (edited)
@daytrader_16894 Not cool mate - if you had good intentions you would have uploaded it as a remix and posted a link to the original model. That's what any decent person would do. I have remixed models from printables and posted them on Makers World before. The difference is I made it blatantly clear it was a remix and posted a link to the original file.
Anyway, you can extract the files from the .3mf file from Makers World without downloading any BambuLabs software, how does anyone know that you didn't do that?
@Reckit Ok, im sorry . . . i updated my description . . . thank you so much!
Please download my STL and compare it to your design . . you will see that nothing was copied . . . your STL wasnt used , .. . every detail is different . . . (edited)