Very nice! I will also make it a pin for my wife.
Printed in bright green ASA

It looks like the "Bottom Right" file is the same as the "Bottom Left". Could you upload the updated file?

The files don't work. There's a duplicate and missing the correct files. Please fix.

Worked like a charm for my space marine army, super sturdy even when you stack it high. I'm always adding more and more every month. 😭

Used base 0.4mm input shaping setting on the MK4 at 72% size to fit 25mm bases (Frostgrave, Imperial Assault) works great! Print times: top 1 Hour, trays 2h10m. (edited)

Not a Starcraft fan, but I really love the design. A bit tricky to print, as printing the "correct" way up yields a large surface area to be supported. Patience and organic supports helped a lot. Note that on my first print one of the tank holders did not print well. Only one was able to be tested and that held the siege tank rather well. Also note that you have to print the "folded" siege tank and not the "unfolded" one.

Scaled 200%.Sliced with PrusaSlicer 2.6.1 with the 0.15 mm STRUCTURAL settings.
Printed with Prusament PLA Blend Royal Blue.