Yanno 10
Yanno
@Yanno_145174
published a new model March 28, 2023 at 12:14 AM
March 28, 2023 at 12:14 AM

Ctrl + Enter to send Enter to add a new line
Yanno 10
Yanno
@Yanno_145174
published a new model March 27, 2023 at 11:58 PM
March 27, 2023 at 11:58 PM

This was what I was looking for! My first year with new snowshoes and had not thought about where to put them. This worked out great! Printed with GIANTARM PETG 0.3 layer height with 20% infill to confirm strength. Screwed into a stud and it works perfectly! Thank you for the design!

Poifect! Prusament petg. 0.6 nozzle. 0.4 layer. 20% infill. 4 perimeter layers.

Ctrl + Enter to send Enter to add a new line
Yanno 10
Yanno
@Yanno_145174
published a new model February 27, 2023 at 11:46 PM
February 27, 2023 at 11:46 PM

Works great. I shortened from my needs and added magnets. Very happy with it. Thank you. I would recommend printing with a brim or adding some blue painters tape to the base once you’ve printed up a couple inches.

Ctrl + Enter to send Enter to add a new line
Yanno 10
Yanno
@Yanno_145174
published a new model January 19, 2023 at 11:03 PM
January 19, 2023 at 11:03 PM

I was looking for just such a wall holder for my DUX60 :-)
The holder was easy to print horizontally, I used PETG. Six perimeters with 20% cubic infill provide good stability. (edited)

Perfect, thanks!
I see now that i´ve been haning my trimmer and clearing saw wrong on the mounts for 6 months.
Printed vertically with PLA and they hold very well.

Ctrl + Enter to send Enter to add a new line
All items loaded