Hi. The model gives an error when importing to Cura, Fusion 360 or MS 3D Builder. It seems there is a problem with the model file. Can you check? Thanks.
@megistas_186584 Hmmm.... it opens fine in bambu slicer. But it crashes in prusa slicer. I have uploaded another version that opens fine for me in bambu slicer and prusa slicer. Let me know if you still have issues.
@Unknownkwita Thanks, it works with Cura. I will upload the make soon.
After printing, I realized the hooks do not actually align with the Skadis
I mean, one vertical row is just fine, but then the next one is nowhere near the holes
View 3 more comments
@Marfinho_275026 @mbravo_111487 Sorry about that. I have updated the model removing one line of hooks and centering the remaining hooks.
@Unknownkwita thank you!
Super!
I printed it with 3 perimeters, as the dividers should be more solid and not to flimsy.
Therefore it took quite long, but end result was awesome!
Thanks
Can you make one for Locyfens, please.
@BrianCauley_296731 Locyfens has been added to https://www.printables.com/model/220537-filament-color-system-chip
Thanks for your efforts. Would you please add german company "Material4Print" ( https://www.material4print.de/filament/)? They have (Tough)PLA, PETG, ASA, ABS, ABS-PC, PMMA, Carbon and ESD filaments.
View one more comment
@Unknownkwita Thank you. Indeed, not optimal. For me personally M4P would be enough. Alternatively, how deep do you emboss the text? I read it's Arial Bold Rounded (at 16 I believe) so I could try making my own with the blank chips.
@a_v_x the text is debossed 0.4mm or two layers. I'll leave it as is while I look for a better solution, it's not the only brand that has this problem unfortunately.
Could you add FilamentOne ( https://www.filamentone.com)? They have PLA Pro, PLA+, ASA, and PETG Pro.
@KevinMcKenzie_799980 They have been added. Sorry for the slow response, got alot happening in life at the moment. :)
@Unknownkwita Hopefully good things happening. Thank you.
