Nice
Here I printed it for a journal cover.
My wife makes junk journals and she love it.
@Speichenbieg_1589785 thank you for the rating. im glad she likes it
Scaled down 50%. Printed upright position, tail on the bed and I used organic supports that were under the wings and stomach.
Very nice raven, but as the wings get really thin, they don't print well.
I printed this with 0.2mm, it didn't help.
Even that the wings are bit shattered, this works nicely in my project.
Thank you. It definitely doesnt scale down very well. I usually end up slicing it up and printing the wings vertically then attaching afterwards
great remix =)
I added a recess in the lid with the prusa slicer to make it easier to remove the lid. (edited)
@syscrash Thank you for the rating, Good idea on the lid
My guy you have saved the day! I was just about to go attempt a chain adjustment for the the first time and was gonna try to do it without an alignment tool ($$) but at the last minute thought to look on here to see if anyone had come up with a solution. I was stoked to see your version of the “fotion pho” ;) and quickly downloaded it. I see you have remixes allowed so I’ll share my results, haha. I didn’t have a 4mm rod on hand and didn’t really want to track one down so I just built one into the model. I had some screws on hand that were 1/4 in - 20 x 2 in (tripod/camera kinda screws) so I sized the hole to be just undersized enough that I could thread the screw straight in with tension. IT WORKED LIKE A DREAM! It printed perfectly, fit the bike chain and was critical to me getting the alignment done. Thank you, thank you, for making this available!! Printed in Overture PETG in black, 0.3 Draft Mode, 3 Perimeters, 30% infill on a MK3S+. (edited)
