Printed in 0,12 Layerhight, 5 Walls, 20% Infill, PAHT-CF - 21 Min for 2 pcs.
Works on my 2023 Honda Hornet 750.
You need a big flat screwdriver, or it will damage the plastic in the middle.
@FelixGrummt_577632 have you enabled fuzzy skin parameter for that print ?
@KK20100KK No, its just the picture that looks a bit odd. I don´t have the right camera for small objects.
Hi, would you mind sharing the step file or f3d? I am using fusion 360 but would like to remix your model to make chamfer on top/side of bolts instead of radius so it could print better with the angle threshold of 45 deg. maximum.
@KK20100KK I added a chamfer model
@Sylvain thank you :) they look perfect. I will give them a try!
I remixed this, adding a tether loop. Thanks for the design.
Remix at https://www.printables.com/model/1040050-beta-rrs-steering-lock-protector-cap-with-a-retent
Just a heads up, the spacer is designed for inches but the model opens in metric for me...so the model is 1mm x 1.25mm x 1.5mm (at least on my slicer). Scaled 2540% and it matches inch/standard measurements. Works great too, thank you.