Great Design. printed in Galaxy black PLA and Yellow PLA. Hope my daughter likes is as much as I do.
Probably not my most flawless print but it is ok. reason is wet filament (edited)
I apologize to DeXTeR40rus
for printing it with the same colors, but my daughter fell in love with that color combination 😄I'll make more colors in the next few days. Many thanks to Sevro for sharing.
My partner works with children and this will be perfect to decorate her new workspace.
Scaled to 70% so it fits pencils (but not the kind with erasers on the end). Printed with Sunlu Rainbow Silk PLA. I printed it and some other items at the same time with 25% infil to make the colours transition and it works great. 25% has given it some heft which will stabilise it on the kids' table.
It is named Mr Prickles the Pencilhog.
Good model, I printed it from PLA at 75% size. It's more like a porcupine because the pencils point in one direction. Maybe the lower pencils are relatively a bit loose in it, but as a stand, it's nice.
Bonita, original y graciosa lámpara de mesilla.
El modelo se ha impreso con el formato separado ya que no tengo AMS, el acabado ha sido bueno, solo puse soportes en la parte inferior del cuerpo principal, puede incluso que hubiera salido bien sin ellos.
Ha sido impresa en color blanco y posteriormente se ha pintado, contento con el resultado, la próxima vez lo haré con filamentos de colores (naranja/rojo, marrón, blanco y negro).
Al imprimirla por piezas, la pieza inferior (la de la madera) se ve un poco débil en sus uniones, sería conveniente reforzar esa parte, aún con todo, repito, muy contento con el resultado.
Gracias por el diseño!!
Nice, original and funny bedside lamp.
The model has been printed with the separate format since I don't have AMS, the finish has been good, I only put supports on the lower part of the main body, it may even have come out well without them.
It has been printed in white and then painted, happy with the result, next time I will do it with colored filaments (orange/red, brown, white and black).
When printing it in pieces, the lower piece (the wooden one) looks a little weak in its joints, it would be convenient to reinforce that part, even with everything, I repeat, very happy with the result.
Thanks for the design!!
Love it! Captured the emotion quite well! :D
It would be great if you made a version with the Body and Legs had separate parts for the various colors. Or with different layer heights for the various colors so everyone could print it in color. It looks great.
@A4O_Labs As you requested I added version with colors on different layers heights :)
@Sevro
Wow! Thanks Servo! :-D
Perfect night light for the bathroom.
Some minor changes I'd suggest. The diffuser is just narrow enough that you can see the lights inside the ring if you look at it from an angle, and the groove for the diffuser could be just a shade deeper, maybe just 0.2mm. I would print the diffuser about 2mm deeper but leave the X/Y dimensions the same.
I used a cheap USB cob light with controls on the cord. It works just fine and is cool all the time so PLA is an option. You have to feed the light through the base and then the ring though since the USB plug and the inline controller won't fit through the hole in the base.
Beautiful design!
Printed in Sunlu PLA+ Black and Elegoo Rapid PETG white (only white I had handy).
