Sabre Design 22
Sabre Design
@SabreDesign
published a new model November 24, 2024 at 7:37 PM
November 24, 2024 at 7:37 PM

Found this in expert mode:

Ctrl + Enter to send Enter to add a new line
Sabre Design 22
Sabre Design
@SabreDesign
published a new model November 11, 2024 at 6:17 PM
November 11, 2024 at 6:17 PM

Very nice!
However, the child seems to have a minor imperfection round the neck, where it looks like it's got a collar. Printed it twice in .1 and .2 layers - happened both times.

Ctrl + Enter to send Enter to add a new line
Sabre Design 22
Sabre Design
@SabreDesign
published a new model September 29, 2024 at 4:52 PM
September 29, 2024 at 4:52 PM

Great Model! Thanks! But there is one improvement... please post a Remix of a hollow top part. I cut out a half ball to save some filament and work of removing supports but i'm not allowed to post a remix.

@Martin_S85_373718 sometimes ive found removing a pocket of material like that can cause a print to use more material in fact, infil densities can sometimes print faster and with less material than adding a pocket in a part since then you must print all your walls in that pocket, so i would bet you didnt save any time with that pocket you added or material. at least from my testing ive found sometimes it can be better to just leave the material there because the way walls and infills get handled, any pocket you add must have walls on the pocket, sometimes walls print slower than infill and with more density than infill. just something to consider

Thanks for the model, it's much nicer in reality than in the photo.

Ctrl + Enter to send Enter to add a new line
Sabre Design 22
Sabre Design
@SabreDesign
published a new model September 22, 2024 at 3:08 PM
September 22, 2024 at 3:08 PM

will be back next year for decoration

Prints fantastic, and you can make new shapes easily by scaling some of the dimensions.

Needs minor tree supports to complete.

Ctrl + Enter to send Enter to add a new line
Sabre Design 22
Sabre Design
@SabreDesign
published a new model September 12, 2024 at 12:09 PM
September 12, 2024 at 12:09 PM

Super cute model! I printed mine in Elegoo Rapid PETG, no brim or raft needed. Made a little base to hold an RGB LED ring and an ESP-8266 board, so now my ghost has WiFi :D (edited)

Ctrl + Enter to send Enter to add a new line
Sabre Design 22
Sabre Design
@SabreDesign
published a new model September 10, 2024 at 7:39 PM
September 10, 2024 at 7:39 PM
1

Inland Autumn Rainbow for the body and Amolen Rosewood for the stem. Really love how they turned out! They look like glass with the light in them.

Nice design, my wife really likes it a lot so I had to print a couple of them LOL

Unfortunately printing is not straightforward if you want to have clean results, there’s some room for improvements to get it more printable.

Don’t waste your time with MMU, the stem has cavities inside which need separate painting and then you still get some holes in it.

Best settings I worked out for a clean body:

0.4mm nozzle, 0.2 IS Structural, 1 perimeter, Classic perimeter generator, gap fill yes, infill doesn’t matter, organic supports @20° threshold

Best settings for a clean stem:

0.25mm nozzle, 0.15 IS Structural, 2 perimeter, Classic perimeter generator, gap fill NO, infill 15% cubic, ironing top most surface

With a 0.4mm nozzle you won’t really get a clean stem.

Printed mine in 100% and 85% scale, anything below 85% will get quite messy again.

Printed in Polyterra Army Green, Army Brown, Muted Green, Pastel Peanut, Sunrise Orange and Charcoal Black.

Once I had everything dialed in they came out really nice, but wasted quite some time and filament to get there.

Maybe you can add those print infos to your description to help others that might be unhappy with their print quality.

Thanks for sharing :-)

@Mike81622 For what it's worth, I used a 0.4 nozzle on a MK4 and the stems came out perfectly. I just threw the STL into Prusa Slicer and used the default .10 speed setting, no other tweaking involved. I used MHBuild PLA.

Ctrl + Enter to send Enter to add a new line
Sabre Design 22
Sabre Design
@SabreDesign
published a new model August 30, 2024 at 7:57 AM
August 30, 2024 at 7:57 AM

Nice design and good print in vase mode

Ctrl + Enter to send Enter to add a new line
Sabre Design 22
Sabre Design
@SabreDesign
published a new model August 8, 2024 at 11:12 AM
August 8, 2024 at 11:12 AM

Thanks to @SabreDesign for this beautiful creation. Only thing I used this as a Lamp shade not for Vase. I printed this in vase mode and increased the size, Also made in the holes in the base for light adapter. So this Seashell Vase i used as a Decoration in Ganpati Festival.

Ctrl + Enter to send Enter to add a new line
Sabre Design 22
Sabre Design
@SabreDesign
published a new model August 5, 2024 at 7:59 AM
August 5, 2024 at 7:59 AM

Very nice! :)

Ctrl + Enter to send Enter to add a new line
Sabre Design 22
Sabre Design
@SabreDesign
published a new model August 2, 2024 at 7:00 AM
August 2, 2024 at 7:00 AM

Description says 1000ml but i measured 800ml with water. Very sturdy print from PETG and a perfect size for a single serving of dog food for my dog.

This thing is Awesome. Feels very beefy and sturdy. I finished off a few old rolls with this print using a 0.8 nozzle and 0.32 line height. It's just over 220mm tall. Thanks for sharing this! Will use as a bird seed feeder loader. :-)

Ctrl + Enter to send Enter to add a new line
Sabre Design 22
Sabre Design
@SabreDesign
published a new model July 18, 2024 at 12:00 PM
July 18, 2024 at 12:00 PM

Simple design and very great for printing. Printed in pla

Ctrl + Enter to send Enter to add a new line
Sabre Design 22
Sabre Design
@SabreDesign
published a new model July 16, 2024 at 5:58 PM
July 16, 2024 at 5:58 PM

Ctrl + Enter to send Enter to add a new line
Sabre Design 22
Sabre Design
@SabreDesign
published a new model July 16, 2024 at 5:35 PM
July 16, 2024 at 5:35 PM

Ctrl + Enter to send Enter to add a new line
Sabre Design 22
Sabre Design
@SabreDesign
published a new model July 16, 2024 at 8:32 AM
July 16, 2024 at 8:32 AM

Ctrl + Enter to send Enter to add a new line
Sabre Design 22
Sabre Design
@SabreDesign
published a new model July 14, 2024 at 11:43 AM
July 14, 2024 at 11:43 AM

Made it scaled for 80%, it works perfectly.
Draft mode (2.4) in Bambu Lab.
PolyTerra PLA Muted Red

Wonderful design! I already printed several & that's not the end :) used Polyterra Matte, my best filament

Ctrl + Enter to send Enter to add a new line
Sabre Design 22
Sabre Design
@SabreDesign
published a new model July 13, 2024 at 10:45 PM
July 13, 2024 at 10:45 PM

Perfect to add to my woodworking tools

Ctrl + Enter to send Enter to add a new line
Sabre Design 22
Sabre Design
@SabreDesign
published a new model June 23, 2024 at 9:45 AM
June 23, 2024 at 9:45 AM

Works with a little bit of fine tuning. I modified the magnet holes to be 8 mm to work with the magnets I had. Would've been five stars if I was allowed to submit the remix :(.

Ctrl + Enter to send Enter to add a new line
Sabre Design 22
Sabre Design
@SabreDesign
published a new model June 17, 2024 at 5:45 PM
June 17, 2024 at 5:45 PM

Ctrl + Enter to send Enter to add a new line
Sabre Design 22
Sabre Design
@SabreDesign
published a new model June 15, 2024 at 6:10 PM
June 15, 2024 at 6:10 PM

Ctrl + Enter to send Enter to add a new line
Sabre Design 22
Sabre Design
@SabreDesign
published a new model June 9, 2024 at 10:00 AM
June 9, 2024 at 10:00 AM

Ctrl + Enter to send Enter to add a new line