@EricShimko_748284 Thank you for sharing your picture of this model! Looks very nice.
@Ankerman_208727 Thank you! I'm glad you like it.
@Jeremy_550153 that’s a clean looking print you got there! I’m glad it worked out for you.
@editab_854624 Thank you for sharing your pic of the model. I hope you enjoyed it.
I added a hoop so you can wear it for a promotion ceremony. I'll post the remix in a bit
@Agile52_2106491 I'm glad you liked it. Thank you for posting your make!
Is this file editable? I want to make an Autobot version of this for my sterring wheel.
@MarioPresents_884600 This file is editable if you use the right CAD program. Blender comes to mind to name one but others maybe possible like TinkerCAD.
@Venca_1250718 Thank you for sharing the picture. Looks decent after post processing.
Printed all pieces in a single color because i was skeptical as to how nicely the pieces would fit as resin printers tend to have an elephants foot when printed directly on the build plate. but all of these pieces fit in perfectly! i snapped them in place and i actually cannot take them back out so these will stay locked in place without excessive glue etc. One suggestion for the outer ring, have an optional/extra perimeter with a ring hole to make this into a keychain as it has potential to be much nicer than the other keychains ive seen. nice work. (the picture is Siraya Tech Fast, Smoky Black resin. Completely raw, no sanding or paint etc)
@espn8theocho Wow, That looks really good! Thank you for sharing your pic and for the suggestion. I will make another outer ring with an attached smaller ring to turn it into a keychain decoration.
Scaled to 30%
Sunlu PLA Red Silk
Followed the instructions but couldn't find Monotonic Top/Bottom
travel speed 40 m/s
@Jo0001 In Cura 5.3 and newer slicer versions, you would go to 'Print Settings', go to 'Top/Bottom' and select the '3 line' menu icon. Another window will pop up and may need to scroll down to see the line that says "Monotonic Top/Bottom Order". Select it and you'll have it in your print settings. Hope this helps.
@Rithm3D
Thank you, but I still couldn't find it probably because I'm using Creality Slicer 4.8 which came with the printer. I've tried to get it to update but it's saying that's the latest version from Creality. I was pleased with the results however it was only a small so it might make a difference on a larger version.
@CamillaBertra_731980 Thank you for sharing your pic. Looks like a start of a white christmas!
@salmawood_67704 now that's a good looking print job! Thank you for sharing your pic!
@Burnsipoo thanks for sharing the print job! I hope you enjoyed printing it.
@Rithm3D thanks for the design, I was to lazy to make my own. looks good on my wheel.
Printed nice
Looks good
Work pretty well
Printed with glow in the dark pla 0.4mm nozzle
@TidusParson_1919564 thank you! Glad you like it!