Update:
Version 6 (11/24/2024)
- Added adjustable parameter for clearance between lid and box to "favorites" in the f3d file.

Update 11/23/2024:
- Combined Left and Right wall thickness into a single parameter to keep box symmetrical during wall thickness changes. (edited)

Update to v8:
- Added f3d file.
- Changed to my new customizable box design.

Update to V3:
Unfortunately I couldn't get auto-desk fusion to level this on the build plate so I used Flashprint and cut the bottom just a hair and lowered it into the plate then saved it as Version 3. So version 3 shouldn't have that end with the supports you will need to re move and smooth down..

Update to v2:
- Changed to my new customizable box design.

Update to v7:
- Converted to my new adjustable box f3d format.

Updated:
* Added 2x2 box for bigger item displays.

Update:
* End left/Right to v8.1:
- Cut ends 45 degrees to fix issues when meeting a side of another box with an end on it.
- Added text "L/R" to identify it as left/right end piece in case of mass print and storage.

* End Top/Bottom to v8.1:
- Cut ends 45 degrees to issues when meeting a side of another box with an end on it.
- Added text "T/B" to identify it as top/bottom end piece in case of mass print and storage. (edited)