Glad you find it useful. I use one of mine to refill my coffee maker's water tank.
If you want drips for the original size bucket you need to get it from the original model that this is a remix of, they are not with this project.
Printed on MK4 with standard IS settings with a 0.4mm nozzle at .2 layer height in PLA. Overture Matte grey for the container and ERYONE Silk blue & green for the drips (edited)
Very nice and simple design. Thanks for sharing.
Prusament Black PETG / 0.4 mm Nozzle / 0.2 mm Layer Height
@manolis glad you like it, and thanks for the feedback. Much appreciated.
@gskollnau hope you find it useful. Thanks for commenting.
excellent model - snap fit works excellently in ABS, holds the Pico nicely, has a pleasing form factor.
@LukePeter_1283694 it could benefit from some strain relief cable tie slots in the void in the rear I reckon. Edit-I added the strain relief and cable support in a remix... (edited)
No supports printed on the side. Just a teeny bit droopy in the lowest overhangs. Worked great with inland tough pla. This is the sand color I used for other bathroom accessories. My pump bottle is 80mm in diameter which fits perfectly without scaling. (edited)
Genius design.
Small footprint but fits my mouthguard perfectly.
Great idea with the replaceable latch as previous cases had broken and lost all functionality.
@CharlieWiscar_843944
Nice print. Glad you find it useful. Thanks for downloading it.
It took me some tuning of my printer, but I finally got it printed and it fits my mouth guard perfectly!
@yappingboy good to hear. And, I guess you now have a better tuned printer? :D
Thanks for the feedback. (edited)
Thanks for design. It was a bit od a hassle with print it but with supports everything was keep on the printing plate
