Printed with GreenTec Pro. Support: Everywhere. Nozzle 0.4 mm and layer height of 0.15 mm. Attach a small lanyard.
View one more comment
@Preppo Filament: Prusa PC Blend Carbon Galaxy Black.
@Preppo I only installed a temperature control, but no overheating protection. I also consider that negligible as long as the fan is running. I control the temperature with a simple regulator. The temperature is maintained very well and consistently. For example, I print with Prusa ASA at around 45°C inside the enclosure, and even large and elongated parts do not warp.
The position of the spoiler is incorrect and cannot be installed
@zhanuo_466442 What did you mean with spoiler. The inner flow divider or the smaller lip for the outside left of the fan opening? Please clarify.
I'm not aware of a different part fan on the mk4.
I'm using this fan shroud for over a year now.
Works great! Easy install. My first time printing with TPU and a good simple print to start. Added a picture with a blue rectangle outlining what the seal looks like in place in case that helps others making this.
