@Shintaro_616215 Hej, great!
The idea and model are excellent! I printed it but noticed it only works for unsleeved cards. I need to increase the print size for sleeved cards.
@Nivekus_270912 yes, thanks for the note - I'll update the description! Can you say what size you print it bigger in %? (edited)
Will this fit cards in sleeves?
@NealRama_1077473 No problems with normal tight sleeves, bigger/harder sleeves fits only in the two sections 90○ each, maybe 20
Printed using random PLA I had using the Bambu Lab A1 with AMS Lite. I love this setup! First multi color print I did. I had to paint it a bit in the slicer to get it to come out the way I wanted but am very happy.
@n9yty_279924 yeah! the colored side looks amazing!
Great option for overflow Pokémon cards or for an on the go trading box. Recently found all my old Pokémon cards (all the frayed discolored ones in the back left) that have been with me since the beginning of time🤣(Gen 1 OG's). For people that would like to possibly store sleeved cards maybe print .3 or .5 larger due to not fitting in the "walled/gridded" (black filament) all in all great for storing the ol poky mans as our parents use to say 🤣🤣🤣 (edited)
@SnicklFritz_464700 Thats a close one, maybe printing a second? Thanks for your comment ^_^ and great collection.btw
@PlasteMetz_576567 I have printed 4 in total (Will be giving one to my little nephew for a little X-mas present for his little collection🎁😁👍) so far they're great! I'll try printing the open black filament center piece I'm sure the sleeved ones will fit in it no problem in that one. Thanks for the awesome model!
@Hutch3d_1318667 huuuu, the semitransparent green looks great
@Hutch3d_1318667 nice color-combination
So, my kid loves this. I did have some difficulty printing the wheel. The overhangs in the inside corners were too extreme and I got a failed print on the first try. I ended up sinking the model a few MM into the bed to get rid of the steep overhangs.
Is that safe? What will happen with the toy if an accident happens?
View one more comment
@PlasteMetz_576567 what will happen if I misuse this and then put it in a space that if someone else uses it who is unsafe uses it without permission? ;) What if I'm running with this and fall on it? Are there air bags installed?
I love it! Excited to share with my kiddos, thanks!
@JamesBoone_1506102 hihihi a little bit of sarcarsm is a good thing :)
Thanks. This is great model . I did with pla silk Rainbow tropical and winter white from #rosa3d filaments. Made in Poland.
@pracus2022_1563242 The rainbow teeth looks crazy! :)
@pracus2022_1563242 Love the cat! :D
@pracus2022_1563242 Very cute! (The cat) and thanks for the make. Cheers to poland
Printed from Sunlu PETG. Doesn't seem to fit as well as the original "PS Vita 2000 Grip Longer" model though. There is a gap on the back side and the camera cutout doesn't fully correspond to the camera. The grip shape is subjectively slightly better the the original model. (edited)
Yeah, I know. The camera hole fits better on my print, but its still not perfect. Please keep in mind - its only a remix. The model is not from me...
nice design! Is there any possibility for 1000 model? :)
@MrAnderson_823305 Ah no time at the moment... ^_^
@PlasteMetz_576567 great job mate, i really hope you do a similar one for the oled model.
Printed this for my partner in rainbow filament and glued the cat on separately. Prints well.
Nice little upgrade for Mini 13
Original is not bad, but this is definitely better
It's just a simple detail that I really appreciate
Thanks for making this!
great, And i love it! my ONLY problem is that it only goes halfway for me. could just be my printer. i just cut the stick thing off and glue it. other than that i love it!
@Artemis_1811610 strange... maybe really a printer issue. Glad you could find a solution!
thanks so much!! love the sleek design
@decepticons1_2962718 thanks so much!
