Works great with the case, really helpful to have a spot to store smaller pieces while working with the Omnifixo!

Schöne Sache! Für die kleinen Teile, die man so beim Löten braucht, eine ideale Lösung.
Ich habe Prusament orange PETG mit einer Höhe von 0,2 mm verdruckt.
Erwähnenswert ist die Tatsache, dass man das Teil samt der Kleinteile aus der Basisbox nehmen kann.
Danke für's Teilen!

Danke 👏

works perfect. But I have to hang the helmet 180° rotated as on your picture, otherwise it wouldn't hang well.

My dad has a big collection of records and I thought this would be a great gift. I thought it was a bit big and I didn't really want to use so much filament so I did a quick remix and chopped off a bit and added a different icon. So far it has been working just fine. I really like the way it looks and the records never tip out of the holder.
zero point two layer height, twenty percent infill, supports off, and for the material I used PLA.

Great stand! Thx for sharing.

Almost wide enough by default for a full roll of LitterRobot bags. I don't have software on Linux to work with .f3d files, but if a .scad file could be uploaded that would be great.

Looks great :)
This is the smallest diameter, but still to wide. But should work anyways. Thanks for the models!

Bonjour, le problème c'est que il vas avoir de l'air dans la pompe et c'est pas bon

Perfect! Thanks for great idea and easy printable part.

Printed 2 peices, one PLA and one PETG. Using them together prevents the lid to deform I guess. Will see which one lasts. (edited)

Fits great on my Dutch bin!

I had to do some post-processing to make it work for me, I bought battenboard that was a little bit wider than 200mm, with sharp edges, so it was too tight to insert. Overall looks pretty nice (I used 800mm long acacia wood, looks strong enough, no need of middle support). Thanks for sharing this.

Resized it a bit and now it fits perfectly on my couch 😊

Hey! What filament did you use to print the inserts? I like the color 🙂

Thanks for sharing this very good and sturdy ES15 case. Since I wanted to accommodate more than the 24 bits supplied by Miniware, I remixed two high capacity versions of the bit holder: https://www.printables.com/de/model/465349-high-capacity-bitholder-for-miniware-es15-cases-mi

Thanks for the model of case with charging port!!! I didn't print the gasket since there is already a pretty big hole in the case, lol.

Works great!

PS: I used parts from different creators and I really appreciate all the time and effort people put into these models. (edited)

Thanks for this awesome model. Was a lot of fun to print. I've remixed it a bit, to pay tribute to my childhood. Some say it looks a bit like a handheld console, but thats pure coincidence. ;)
If there is some interest, I'll publish the case as a remix.

white: 3DJAKE - ecoPLA Hellgrau
blue: 3DJAKE - ecoPLA Dunkelblau
purple: 3DJAKE- ecoPLA Violett

Used DALLE 3 to make some art (pop art, limited color palette) and photoshop to expand the aspect ratio to match the case and then printed on the XL out of various PETGs. Removed grease from bearing by prying out the rubber seal and flushing with 99% IPA and WD-40 in alternation.

Works great. I wish there were 6x5 versions posted, but the 5x4 works for me for now.

I had the same issue as @NiklasLjung_563204 and so made my own lid insert that keeps the bins and their contents in place: https://www.printables.com/model/491142-rugged-gridfinity-box-lid-insert

I really like this model.
Only downside are the 6 m3x30 screws, and maybe that they only srew into plasik.
But otherwise A great design for multi purpose uses.

Also I really recomend the lid inserts that are available in the remix section.
(I also added one for half size bins like the ones in my picture.)
I think anyone of those, really help to keep the boxes sorted. (edited)

great decor for the wall. love it

Nice collection. Thank you. Printed the lion first because its our sons star sign and brown is his favorite colour.

Worked like a charm. Simple print. Managed to get the print time down to just under 4 hrs with a .3mm layer height, 5% gyroid infill. Still solid.

Perfect fit! Thank you!

Looks great!

This stand is absolutely perfect! It fits great and it's at the perfect angle. It looks amazing with a light kit too.

1A modell. Printed perfectly, fits perfectly, look awesome

Fun (edited)