Very handy
Hello, Can I put cutouts in the middle? I would like to add LED lights, and it would be better to put them symmetrically.
@Andrius_14108 Yes, you can put the cutouts anywhere you like. The reason I included Split_Top_Full_Panel.stl was so anyone could modify it to suit your own needs. I placed the HEPA box towards the back-right so it wouldn't blow on the print and I could add a light in the centre (which I still haven't gotten around). (edited)
@PeterMain Can you give .step file?
Unfortunately FAN does not fit... Please give step file to adjust the size.
View one more comment
@PeterMain I bought the fan from a link that is in this description. It need about 1mm more space. Maybe they changed a design a bit. It is very close
@Andrius_14108 OK, I've uploaded the STEP file (to the Box Parts folder). Good Luck.
Used this for a mosquito killer cassette (so it doesn't have to sit on the bedside table next to me).
Thanks for the model.
it worked without problems and printed as well flawless.
Print settings (Bambu Lab P1S):
0.4mm nozzle
0.2 height
0.42 width
1st layer 100mm/s
Other layers 200mm/s
walls 2
top layers 2
bottom layers 2
15% infill
Arachne wall calculation
@tikycaj that filament looks really nice. What is it? Concrete?
@DatPrinterTh_2330367 PLA Marble Aurapol
The ASA printing skirt is an elipse so it less likely to detach from the bed than a normal slicer created skirt.
Exactly the right angle so the whole printbed is visable.