Michael McGoldrick 11
Michael McGoldrick
@MichaelMcGold_296810
published a new model February 21, 2024 at 9:33 PM
February 21, 2024 at 9:33 PM

Very nice little model. Printed at 1/3 size in PETG with 0.1mm layers. The result is great, though I lost the tip of the ear. I'm going to claim he's a stray that's been neutered. I've filled the layer lines with bondo, and he's lovely and smooth. Hopefully he'll make a nice mold for an epoxy cat.

Ctrl + Enter to send Enter to add a new line
Michael McGoldrick 11
Michael McGoldrick
@MichaelMcGold_296810
published a new model April 3, 2023 at 10:33 AM
April 3, 2023 at 10:33 AM

Was able to scale it up to work with some generic airbrush paint. Thanks!

Printed on Prusa Mini at 0.35mm layer heights with a 0.6mm nozzle. Fits Vallejo paints perfectly!

Ctrl + Enter to send Enter to add a new line
Michael McGoldrick 11
Michael McGoldrick
@MichaelMcGold_296810
published a new model January 27, 2023 at 2:07 PM
January 27, 2023 at 2:07 PM

Ctrl + Enter to send Enter to add a new line
Michael McGoldrick 11
Michael McGoldrick
@MichaelMcGold_296810
published a new model September 13, 2022 at 9:46 AM
September 13, 2022 at 9:46 AM

My daughter asked me to 3D print and owl. Looks so cute!

Polymaker PolyLite PETG Black

Ctrl + Enter to send Enter to add a new line
Michael McGoldrick 11
Michael McGoldrick
@MichaelMcGold_296810
published a new model July 1, 2022 at 4:21 PM
July 1, 2022 at 4:21 PM

Ctrl + Enter to send Enter to add a new line
Michael McGoldrick 11
Michael McGoldrick
@MichaelMcGold_296810
published a new model July 1, 2022 at 8:12 AM
July 1, 2022 at 8:12 AM

Scaled and needed slicer to repair, but otherwise came out really nicely

Ctrl + Enter to send Enter to add a new line
Michael McGoldrick 11
Michael McGoldrick
@MichaelMcGold_296810
published a new model June 24, 2022 at 1:59 PM
June 24, 2022 at 1:59 PM

Tweaked the slicer settings to make it 28 mm wide, then to print only the front half. I glued it to a plain gauge design to turn it into a holiday ear decoration.

Ctrl + Enter to send Enter to add a new line
Michael McGoldrick 11
Michael McGoldrick
@MichaelMcGold_296810
published a new model June 23, 2022 at 11:07 AM
June 23, 2022 at 11:07 AM

Printed with Prusament Galaxy Black PLA with variable layer height. It came out with an unintended effect probably due to the variable layers. Now my squishmallow kitten wears a bandana! 😂

Cute! My girlfriend loves it. Printed in Ninjaflex TPU

@reddaugherty thanks, I'm glad she likes it! It looks great in that orange TPU! I've never used TPU before - is it satisfyingly squishy?

@MichaelMcGold_296810 it is pretty squishy, but not as soft/squishy as I thought it would be. I could probably make it softer if I print with less walls and less infill but I haven't gotten around to experimenting with it that much. It is pretty fun to print with and I definitely recommend giving it a try. (edited)

Ctrl + Enter to send Enter to add a new line
Michael McGoldrick 11
Michael McGoldrick
@MichaelMcGold_296810
published a new model June 22, 2022 at 9:34 AM
June 22, 2022 at 9:34 AM

Ctrl + Enter to send Enter to add a new line
All items loaded