Prints work great magnets fit perfect do you reckon you could include some centre line indicators and maybe a couple more sweeps like 10 and 22.5 degrees thanks Greg
First print using this profile failed, however I don't believe that is from the profile the model I was using could have used a brim (although the P1S did fine with the same model) I may try bumping the bed temp up a bit. I am seeing some ghosting mainly in the y direction, going to try tightening my belt up a bit see if that helps. However I have been struggling with getting inconsistent cooling levels causing my PETG to appear different shades. I was at wits end, but this profile seems to have none of that so I am going to start making some tweaks off of this thanks for posting!
@JonathanStok_1262146 Thank you so much for the feedback!! From what I can tell, the acceleration and other movement tuning are driven by the settings in klipper and the slicing parameters do not seem to make a difference. I also struggle with some ghosting but I think it is because i need to run more tuning on the printer itself. Wildrose builds on youtube did a great breakdown of the tuning steps for this printer.
For cooling with PETG, I actually have the big blower fan OFF, and just use the cooling on the print head. See if flipping the switch off on the fan housing helps, if nothing else it will be quieter!
can you share your all Neptune 4 pro config file pls i need pla settings also bc my settings after 3 layers it corrupt everything but i dont have any issue with cura with the same 3d file
Great planter pot, just need to find a bad ass plant to go in it.
Printed as suggested, fully waterproof.
@richrab_55358 nice print, thanks for sharing! I love that color, it really makes the shapes pop!
Great designs, easy to assemble.
But is it possible to shrink the pipes to 1.375" and the first Y union 1.375" to 1.5", and the second Y from 1.5" to 2"
Thanks
Cool design :).
But aren't there 7 cells?
View one more comment
@MechVince
No problem ;) I've printed one fo me. Thanks for sharing
@Mrcina_127812 no problem, happy to see someone else getting some use of it!
@Mrcina_127812 looks great! Nice color range!
Printed with FLASHFORGE Burnt Titanium PLA .4mm nozzle
0 Top Layer, 4 Bottom layer, 4 wall loops, 0% infill density.
Came out beautifully!
Beautiful print! Thanks for sharing!
