Was easy to print
The parts fit together by pressure, there's no need to use any glue. The only problematic ones are the spools, which can have very different dimensions.
Nice one, the cats is enjoying this.
Only printed the lower part, but still fun
It is the holder I like the most.
What I like about it
1. can print without support.
2. hooks are printed in XY direction and have high tensile strength.
3. the depth of the hooks makes it strong in the Z direction.
4. less material is required.
Better method
1. to install in the top row of SCADIS, it must be inserted in the fourth row from the edge.
2. inserting another diagonal column in the center would increase the strength. (edited)
Used it to recycle a nearly empty filament and swapped to another silver after it. Very useful Tea container for us.
@KyokaiGaming The container looks great! Thank you so much for posting the realization, it means a lot to me because I didn't expect anyone to like it. Warm regards!