Printer: prusa mk4
Filament: overture PLA matte black
Nozzle: 0.4mm
Printed a gridfinity swatch box to fit in my kallax drawers. Came out great with no issues.
Turns out random heat inserts are quite different than Stefan’s. It is adequate for now, but long term I’ll look for a different design.
As a side note it seems these are looser against my base than other 1x1 gridfinity squares.
This looks great. Getting ready to test and print some boxes, but I wanted some clarification on total height. In your details you state, "Height 4 = 5+7*4+5 = 36mm with 28mm for storage." Shouldn't that be 38mm total? You state 5mm is for the stackable lip, is the other 5mm for the part that goes in the grid? So if it is 38mm total, would that be from the very bottom all the way to the top? Thanks.
View 8 more comments
@knwldg_188814 Sorry, did not have much time. But, OMG you're right. Well, you know you are right... I did not know you're right.
There was a mistake. Luckily it was relatively easy to fix mistake (basically the radius was double). It is not straight double because consequently I used offset in the sketch to create the rest. So it was a little confusing. Small fix was needed for the fingerThingy and labelThingy.
Already printed boxes will work as long as you wont be stacking correct ones on top. I deeply appologies to the community.
I uploaded fixed version.
@MarB No problem, that's what the community is about. Glad it was an easy fix for you. I will give the new file a try soon and thanks again for the great file.
Great model! It takes about 10 hours on the mini, but the result is fantastic. It only needs some type of cover to make it easy to carry.
Thank you for the model!
Edit: finally added the Blades. (edited)