Christoph
@Christoph_18726
Well made and easy to print model, but do not fit on Makita rail.
Unlike what is stated, Festool rail differ in several details from other rails.
Awesome model and print, unfortunately it doesn't fit my existing containers. Printed it without supports, even the large bridge at the top turned out great.
Work great in trolleys and lockers, and prints super-quick. the holes in the middle allow you to hook it on a keyring too. (edited)
View 3 more comments
@MakersManual_1870554 too loose
@dbozec thank you for the feedback. I have just created a tighter version for thinner handles. If you have the time, would love to know how you get on with the new 'tighter' design, also, out of curiosity, does your handle measure 3.8mm thick? (edited)
Precisely what I requested, and made super fast. much appreciated thank you for this.
Super Teil
Kein Dreck Kein Staub
Die 3 Hand beim Löcher bohren ;)
TIP TOP
Danke
One of the best models I have printed so far. Printed using PETG and recommended settings: 0.2mm layer height, 4-5 perimeters, 15% infill and 10 mm inside and outside brims (maybe overkill, but I wanted to be sure it will not fall down). I used some window insulation tape I had laying around and it works great with Karcher vacuum cleaner.
Orienting it on a build plate is easy (Orca Slicer). Once you rotate it 90° you will see, that the hose end is not flat on the surface, so you will do another 5° and it will be perfectly placed.
One trick: leave some brim on the blade, like maybe 1 wall thin brim, and then fold and wrap that brim upwards. it protects the blade from unintended quick wears, keeps it very sharp for a long time.
overall very nice design, thanks OP!
Deffinitely suggest printing this scraper over most. I love the removable blades, such a great choice. Currently got mine on a retractable holder by my printer. XD
I like this idea!!!
Printed from PETG, all parts with organic support and brims for a better adhesion on the print sheet.
I use my adapter for my pillar drill from 60mm down to 46mm: https://www.printables.com/de/model/835709-60mm-to-46mm-clamp-adapter
@OliverCerny_733527 Thanks for the adapter, I have the same drill. 👍
@OliverCerny_733527 Muchas gracias, necesitaba eso para mi taladro
I have to create new funel fo my application, but basicaly the system is perfect. Thanks.
I used tinkercad to cut out the logo and CA Glued it in (printing with the color would have taken an obscene amount of filament) - in the pics it doesn't look great but from across the room you can't really tell it's not printed in the model. (edited)
