Do you have the part number for the panel you purchased?

Thanks. 25%? 40%? infill?

Printed with prusament pla on mk4 mmu3. Great idea and thanks for sharing. My print tuned our to have quite some clearance so the mount is a bit tippy.

This is a much more elegant solution than shoving a longer bowden tube into the existing inlet and having it bend awkwardly to come out through the grille, or having the filament path run through an unsupported runout sensor like I had tried previously! I love being able to put things on top of this printer, since it's already furniture-sized, and this meets all my requirements *plus* having the guide pivot freely. Very well done.

I did not have any issues getting the mounting tabs to print well, but they do feel a little thin compared to the stock bracket's retaining tabs, and it feels like a fair bit of the structure comes from its (admirable) grip on the corrugated tube, rather than in/on the printer's slots.

I *did* have some print errors that happened when my arachne-based slicer profile bugged out an extrusion width and boogered an entire layer, but once I figured out it was trying to print almost *1cm* wide transition layers, and switched my workflow back to the legacy slicing engine, this model printed in one shot, with minimal supports.

Printed well and didn't have any issues. Only thing that would have made it easier is to have had some instructions on optimal print orientation but other than that, does what it is intended to do. Thanks for the model!

Great when you are using filament dryer. (edited)

Nice upgrade ! The long version fit perfectly in a very tiny space above our V400's. Thanks !

Thanks for the info and making this available!

The stl or 3mf file dosen´t work on my V400 and the V400 of my friend also. (Die STL Datei konnte weder repariert noch zu Ende gedruckt werden. )

very nice

Nice Model ! Print well !

Thanks :)

Turned out great. Thanks for sharing this model!