Nice model. This print was the first print, came out a bit small for the soaps I have, so I scaled it up for the second attempt. I guess soaps are a bit bigger where I'm from xD
precisely what i needed. thank you! hard to explain to folks why this is needed glad you get it!
View one more comment
@Leon_H do you think there's a way this could be adjusted for the Mercury Plus 2.0 Large wash/cure combo machine? it's got a flat back with the sensor not in the corner. Only realizing this after I use my bigger machine after having your model fit my old one perfectly. if you don't have that model, disregard. I'm thinking the only real option is to use those bolts at the base of the curing part of the machine and make some sort of crude "U" shaped piece that does the same thing as what you designed here .
@CYMotorsport_548612 Hi, I would not mind changing the blocker to fit the Mercury Plus 2.0 but I don't own that machine. If you can send me a picture and / or measurements I can try though.
Works like a charm
Thanks for posting these splits! I may go back at some point and paint in the labels, but they turned out pretty good as-is.
@Aaron No problem, thanks for posting!
Hey, is it possible to get an option with the spare parts and pen tray merged. I'd love to put away my blight there, as I printed the (in my opinion) nicer blight tokens.
Also, what's the use of the pen?
Awesome stuff! Nearly done printing. Just got a printer and this was the first thing I started on !
@Jomik_1060751 Hi, thanks for your comment. :)
Yes I can do that, give me a few days. We use the pen for a checklist where we check off for each spirit when we have won a game against an adversary at maximum level.
@Leon_H Aah, that makes sense. It was the one thing I just couldn't wrap my head around, for some reason. :)
Superb insert! I printed it for a friend who was very happy with it. Only downside is that it's very hungry for filament - I ended up using about 1.7kg.
View 2 more comments
@DireLlama_331095 What was the total print time?
@HenrikForsbe_1775930 I didn't time it, but IIRC I printed for 8-15 hours every day over a little more than a week. I'd say about 80-100 hours or thereabouts? Printed with 0.2mm at 200mm/s.
Wahnsinn, das Insert ist echt gut designt.
Könnt ihr mir sagen wie iviel Kg Filament ich ca benötige?
Würde Gerne gleich in einer passenden Farbe PLA bestellen wollen.
:)
@Chris_759384 Hi, vielen Dank. 🙂
Ich meine es waren circa 4 KG bei mir, etwas mehr als 2kg weiß und etwas weniger als 2 kg schwarz. Du bräuchtest also vermutlich 3 Rollen weiß und 2 Rollen schwarz wenn du die Farbe wie bei mir haben möchtest.
Hi,
Dies sieht ja super toll aus. Ich bin begeistert!
Ich wollte schon anfangen zu drucken (mein dt. Spiel kommt erst in 2 Wochen) aber ich habe nicht ganz kapiert welche und wie viele der Druck Dateien von diesem Modell und dem englischen Insert ich tatsächlich drucken muss.
Gibt es für einen Dummy wie mich eine Aufstellung irgendwo?
Danke!
(Update: Sterne vergessen...) (edited)
View one more comment
@Leon_H Hi, hat alles geklappt. Nur (aufgrund der Menge der Files oder meiner Dummheit😜) habe ich ein paar doppelt bzw. in der falschen (unpassenden) Farbe gedruckt.
Nur eine Frage: wo sollen die 5 "single Monster Stat cards" aufbewahrt werden?
Nochmals danke!
@TA_1761738 Hi, sehr gut. 🙂 Ich kann mir gut vorstellen, dass es durch die vielen Files etwas unübersichtlich wird.
die single Monster Stat cards kommen in das Tray namens Additional Monster Stat Sleeve Lids. Die brauchst du nur dann, wenn du beispielsweise zwei verschiedene Imps in einem Szenario hast. (edited)
Does anybody know how many filament rolls are required for this print? I guess that this option is more economic than buying a laser-cut insert but wanted to make sure before strating the process...
@PabloSantama_1163660 Hi, it should be between 4 and 5 Kg. 🙂
@Leon_H Thanks Leon!! Amazing work btw! :)
Great project, already printed the character boxes and just started with the monster boxes. Am I right, that the stat card of the monster slides just under lid of the box? Do I just lay the stat card on the table and the lid on top of it, without securing the card somehow?
Will definitely post a make, when it's done in some weeks. Thank you so far!
@Octo Hi, the stat card slides into the notch of the monster tray and then the lid slides into the same notch of the monster tray. The stat card and lid are secured by friction. 🙂
I previously included a make of this excellent project, but was somehow unable to "star" it. Here be the missing stars.
This is my current favorite public project and by a wide margin.
Also, since I used the included Fusion360 file to create larger ducts along with lids and connectors I uploaded them (see link below) to Printables giving all the credit I could to you. My guess is I may not be alone in wanting/needing larger ducts. If this bothers you, please let me know and I will remove the uploads.
https://www.printables.com/model/873623-cable-duct-parametric-additions (edited)
@DrakousIero_151978 Hi, thank you very much for the first make, I really appreciate it! Awesome to see that you utilized the fusion360 file because specific customization is exactly the intent of this project. 🙂
Thanks for sharing the fusion files!