Its a good model that printed well, but as the other comment said supports were a bit of a pain, but its def sturdy and works as intended.
@maynard024_2733061 Hey, do you have an idea, how to design it, so the supports are less annoying?
I wound up have to increase my xy hole compensation for the parts to fit properly
@Fairaday_2058456 Thats odd. I believe it worked just fine for most people.
@LeonKabel I think I remember this particular filament having issues with that, I'll need to do some testing on my side
this looks like it would be realy good for keychain hook too
@AntonioIbarr_2557595 Thats a good idea. Thank you. I might add that tomorrow.
Hey, love the design. How much to the cones weigh?
@MurkDocents_3144501 Hey, thank you. The normal cones weigh about 8g, the big ones about 30g and the plates weigh from 5g to 50g depending on the size.
@Aries310_2931675 Love to hear it!
@Querscheck Love to hear it!
Easy print. Loose was a good fit since I was not so sure if the screw was a M1.6 or M1.7 (edited)
Glad you liked it.
Printed in two colors on BambuLabs A1. Created a little box to keep it together.
View one more comment
@LeonKabel Well, there not much remix here. The two color thing was accidental ( I ran out of grey filament near the end of the printing, so I just pushed in what I had available). I can send you the .stl of the box, so you can just add it here ?
@CeesMeijer_7801 that would be great.
Printed with PLA, 2 perimeters and 15% infill. Puzzle is not hard to solve. I reduced the scale to save printing time. Cube length is 62 mm per side. Printed on MK4 using 0.4 nozzle, input shaping, speed 0.2 layer height.
Printed very well and the fit was great. Used Bamboo Lab Basic PLA White. Thanks for the print!
Thanks for the remix!