Thanks, printed in ASA

Was able to keep my large print in PC from warping

I like they way they look. After printing, I found they don't fit the AMS I have. They are slightly too small. I will try to pivot. But thank you for the contribution.

Useful tool

Printed with Prusament PLA, nice work, light and sturdy enough.

Fits X1C, P1P and P1S perfectly. Really nice design!

Makes a good tool great!

The snaps are quite rigid and maybe a little too deep, and I broke one off the first time I tried to assemble it. The second time, I used my slicer to add modifiers so that the snaps got 95% infill bottom to top, then I filed the edges way down, and assembly went much better.

I had trouble finding 10x2.8mm magnets, but found that 10x3mm magnets worked perfectly.

I used Polymaker PolyLite ABS and Hatchbox ABS. (edited)

Solid!

Thanks for this remix! I had to modify the original model with a drill and it didn't have the bottom support, so it was a bit wobbly. This is perfect and I can finally use some of the larger spools I have here.

I used normal filters from vacuum-cleaner
In 3 layers. Works great. Thanks

easy print fits well thanks

Easy cool print

Black ABS, shrink was perfect fit even without tape it holds by itself without to much force.

Printed great. This is ASA filament. Thanx for the model.