Hi, i have some problem to print it.
I rotate the object 90 degrees but the surface is not flat
will it work on sv06+ ?
Just a note: The AMS will not close any more as the spools are too large.
původní model zvětšený 200%, bezproblémový tisk ma mk3s+, filament petg Noctuo white, Díky za model
original model enlarged 200%, trouble-free printing ma mk3s+, filament petg Noctuo white, Thanks for the model
I had to restring one of Hunter Douglas shades. After getting it all apart, I discovered these barrel and clips were broke. After scouring the internet, I stumbled upon this print file. These printed out great and fixed our broken shade! Thanks for sharing this file!
@JLHSolutions_225949 awesome. We had the same issue with a bunch at my mom's place so I figured I'd whip some up for anyone not wanting to pay the 75$ at the store.
Hi,
How to disconnect the cable from the bed to place it inside this part?
@_866128 the same way you remove the factory one. Disconnect it from the mcu and feed the wires through.
Hey, What's the best way to connect it to the fan?
Works fine helped me to reduce heatcreap. (printed in colorfil red pla)
New ducts means new hood. Love this starlight filament from Polymaker and this model is perfect.
@AlexReyne_842728 that's looks so mean! I love that color. ACID3D did a great job on that set up. The next version we are working on will be even better. Stay tuned. :)
Great design! Thanks for sharing. I printed in Eryone orange PETG & the cooling is great & more adaptable.
@Barkingmad15 i love the color! That turned out great!!!
Great model, easy to print, great airflow.
You’ll have to excuse my wires being gaffer taped, I need to shorten them.
@Aiddy81 I think one of my neptunes is still like this from the prototyping phase. So no meed to worry. Looks great!
I was able to print it in PETG with no supports. It fit perfectly on my N3P, and the designer's recommendations for the 5015 fans and 2.0 pin adapters (including the reminder to watch the polarity) were spot on. Those Winsinn fans are nice and quiet even when running at 50%.
One question: Where are folks finding the front cover for the shroud?
View 3 more comments
@KittyBeans66 I'll give it a shot if you don't mind. Whenever is convenient...thanks again!
@beandaddy_1603922 no problem. I'll try to get that up for you today
Prints fast with no supports and works well. It's clear of the fan shroud, though the nozzle may collide if you're using every inch of the corner.
I Z-scaled so the shorter part was 13mm high, printed 2 in PETG, and now aligning the bed is so much easier.
Thanks, now my Laptop has more space. Simple functional & brilliant. (edited)
View one more comment
@KittyBeans66 To be honest it was on sale ;) but I still like it so I had to buy it!
@Divixolin_1298306 nothing wrong with that at all
The only the I would change is the recess cuts. They make the model print worse and you need supports. I would do away with them and the part would be more rigid as well. But.. It is a functional part and it works great! Inserts went in perfectly.
Update: The extruder head does bump into the screen now.. (edited)
Nice and simple. Works great.