Johny69 17
Johny69
@Johny69
 published a new model December 17, 2024 at 1:46 PM
December 17, 2024 at 1:46 PM
MGNZ induction annealer additional parts and addons
  1. Sports & Outdoor
  2. Outdoor Sports
4
0
6
S 0
saguaro climber
@saguaroclimb_2721228

Getting ready to start my annealer build and am so glad I found this. Really like the coil guide! Thanks for sharing these parts!

Reply December 22, 2024 at 3:52 PM
Ctrl⌘ + Enter to send Enter to add a new line
Johny69 17
Johny69
@Johny69
 published a new model September 10, 2024 at 7:43 PM
September 10, 2024 at 7:43 PM
Nespresso Citiz drip tray replacement
  1. Household
  2. Kitchen
1
0
11
Ctrl⌘ + Enter to send Enter to add a new line
Johny69 17
Johny69
@Johny69
 published a new model August 22, 2024 at 7:20 AM
August 22, 2024 at 7:20 AM
Glock 33 round magazine pouch / holster
  1. Sports & Outdoor
  2. Outdoor Sports
8
0
28
Ctrl⌘ + Enter to send Enter to add a new line
Johny69 17
Johny69
@Johny69
 published a new model August 22, 2024 at 7:14 AM
August 22, 2024 at 7:14 AM
CZ 457 race/competition magazine pouch
  1. Sports & Outdoor
  2. Outdoor Sports
3
0
30
Ctrl⌘ + Enter to send Enter to add a new line
Johny69 17
Johny69
@Johny69
 published a new model August 12, 2024 at 6:59 PM
August 12, 2024 at 6:59 PM
Glock 33 round taco remix
  1. Sports & Outdoor
  2. Outdoor Sports
1
0
12
Ctrl⌘ + Enter to send Enter to add a new line
Johny69 17
Johny69
@Johny69
 published a new model June 21, 2024 at 6:44 AM
June 21, 2024 at 6:44 AM
Safety flag / magazine (Flagazine) for Tikka T3X Tac A1 or CTR
  1. Sports & Outdoor
  2. Outdoor Sports
6
0
79
Fleedwood 21
Fleedwood
@Fleedwood
Reply July 18, 2024 at 8:48 AM
Prusa MK4 & MMU3
Ctrl⌘ + Enter to send Enter to add a new line
Johny69 17
Johny69
@Johny69
 published a new model May 9, 2024 at 6:04 PM
May 9, 2024 at 6:04 PM
TriPod Backpack mount / holder / clip
  1. Sports & Outdoor
  2. Outdoor Sports
2
0
13
Ctrl⌘ + Enter to send Enter to add a new line
Johny69 17
Johny69
@Johny69
 published a new model March 22, 2024 at 12:29 PM
March 22, 2024 at 12:29 PM
Flat pins for D&D Tracker Book
  1. Tabletop Miniatures
  2. Miniature Gaming Accessories
4
0
22
Ctrl⌘ + Enter to send Enter to add a new line
Johny69 17
Johny69
@Johny69
 published a new model March 11, 2024 at 10:33 AM
March 11, 2024 at 10:33 AM
SwissCard magsafe mod
  1. Gadgets
  2. Other Gadgets
6
3
22
Maxime Gatien 7
Maxime Gatien
@MaximeGatien_871379

Only for the Swiss Card Lite

Reply September 9, 2024 at 7:41 AM
Ctrl⌘ + Enter to send Enter to add a new line
Johny69 17
Johny69
@Johny69
 published a new model February 2, 2024 at 3:42 PM
February 2, 2024 at 3:42 PM
Phone mount and charger for SKODA Octavia IV
  1. Hobby & Makers
  2. Automotive
8
0
51
Ctrl⌘ + Enter to send Enter to add a new line
Johny69 17
Johny69
@Johny69
 published a new model August 24, 2023 at 9:21 AM
August 24, 2023 at 9:21 AM
Vacuum hose holder
  1. Household
  2. Other House Equipment
42
5
285
Márty 7
Márty
@MartinHynek_1617578

I've made some small changes on model, but base is really good. Works fine

Reply May 26, 2024 at 3:51 PM
Prusa MK4
SebG 17
SebG
@sebgph_813617

scaled down to fit my cupboard and fitted with heat inserts.
printed in Prusament PLA Gentlemen Grey with 0.6mm nozzle

Reply June 24, 2024 at 8:54 PM
Prusa MK3/S/S+
Ctrl⌘ + Enter to send Enter to add a new line
Johny69 17
Johny69
@Johny69
 published a new model July 20, 2023 at 6:48 PM
July 20, 2023 at 6:48 PM
SEND iT electronic level mount for SPUHR
  1. Sports & Outdoor
  2. Outdoor Sports
8
0
198
Ctrl⌘ + Enter to send Enter to add a new line
Johny69 17
Johny69
@Johny69
 published a new model July 20, 2023 at 5:30 PM
July 20, 2023 at 5:30 PM
Vector Optics Frenzy cover
  1. Sports & Outdoor
  2. Outdoor Sports
3
5
50
rafalr 18
rafalr
@RafalR

Printed very nice without supports

Reply December 3, 2023 at 6:55 PM
Prusa MK3/S/S+
drogendo 11
drogendo
@drogendo_570406

Hello, its for FRENZY 1 x 17 x 24 ?

Reply September 14, 2024 at 6:44 PM
Ctrl⌘ + Enter to send Enter to add a new line
Johny69 17
Johny69
@Johny69
 published a new model July 20, 2023 at 5:09 PM
July 20, 2023 at 5:09 PM
M-LOK CZ 457 mag holder
  1. Sports & Outdoor
  2. Outdoor Sports
10
0
40
Ctrl⌘ + Enter to send Enter to add a new line
Johny69 17
Johny69
@Johny69
 published a new model July 20, 2023 at 4:54 PM
July 20, 2023 at 4:54 PM
Spotting scope iPhone adapter
  1. Sports & Outdoor
  2. Outdoor Sports
16
5
120
Phillip Snyder 13
Phillip Snyder
@psnyder_1863905

Great model. Printed out on an Ender 3 v2.

Reply April 19, 2024 at 11:26 AM
Creality Ender 3 V2
Ctrl⌘ + Enter to send Enter to add a new line
Johny69 17
Johny69
@Johny69
 published a new model June 23, 2023 at 1:24 PM
June 23, 2023 at 1:24 PM
SPUHR DOPE card holder
  1. Sports & Outdoor
  2. Outdoor Sports
27
0
252
jared speer 4
jared speer
@jaredspeer_1524234

Where or how is this mounted onto the ring?

Reply December 8, 2024 at 5:28 PM
Ctrl⌘ + Enter to send Enter to add a new line
Johny69 17
Johny69
@Johny69
 published a new model June 21, 2023 at 4:25 PM
June 21, 2023 at 4:25 PM
Oryx Chassis competition upgrade
  1. Sports & Outdoor
  2. Outdoor Sports
53
5
455
C 10
calgarysparky
@calgarysparky_654054

Made some mods, but a decent build!

Reply 1 like January 10 at 2:30 AM
ZeroG Mercury One.1
mtnman 8
mtnman
@mtnman_1164011

Print turned out awesome. Made a few small mistakes because I was impatient but most of them are out of sight. Hardest part for me was finding the m10 full thread bolt. Ended up using 3/8 and used epoxy that held it fine.
Awesome print. Definitely worth the effort. Appreciate all the time this must have taken to design

Reply 2 likes December 9, 2023 at 5:02 PM
Bambu Lab P1P
Ctrl⌘ + Enter to send Enter to add a new line
Johny69 17
Johny69
@Johny69
 published a new model March 12, 2023 at 6:55 PM
March 12, 2023 at 6:55 PM
Deeper lid for 308 ammo box
  1. Hobby & Makers
  2. Organizers
23
5
158
reponinja33 9
reponinja33
@reponinja33_1486070

Works great so far

Reply February 14, 2024 at 1:47 PM
Creality Ender 5 Plus
0 5
01eggy10
@01eggy10_108768

This lid does does not fit on the box. Side to side is perfect but front to back is to big. (edited)

Reply April 7, 2024 at 7:14 PM
Ctrl⌘ + Enter to send Enter to add a new line
Johny69 17
Johny69
@Johny69
 published a new model February 1, 2023 at 12:02 PM
February 1, 2023 at 12:02 PM
SKODA Superb sprung cup holder
  1. Hobby & Makers
  2. Automotive
45
5
356
ZYO3D 6
ZYO3D
@ZYO3D_2328580

thank you (edited)

Reply September 17, 2024 at 2:58 PM
František Kršňák 22
František Kršňák
@FrantisekKrsn_649209
Reply 1 like May 31, 2023 at 5:22 PM
Creality Ender 3 S1 Pro
Ctrl⌘ + Enter to send Enter to add a new line
Johny69 17
Johny69
@Johny69
 published a new model January 17, 2023 at 4:01 PM
January 17, 2023 at 4:01 PM
L.E. Wilson Trimmer shavings guide and catch bin
  1. Sports & Outdoor
  2. Outdoor Sports
3
0
35
Ctrl⌘ + Enter to send Enter to add a new line