Hi, me again, back with another dumb question :X The fans for these, do they use PWM or is just on/off ok? (the more powerful HoneyBadger fans will only work on/off if not using tripple wire)
@Steinerse_1875806 It depends what setting you use with them. I use the script listed in the original project here. https://www.printables.com/model/334276-the-filter-for-voron-24/files
This will set the fan speed based on what your bed temp is set at. So higher for PLA, etc.
Its why i only use the 2 wire 6400 RPM PWM fans in these. (edited)
There's something oddly satisfying with how "The Filter" works and how it just snaps into place with the bungy power connectors. Great help from the creator figuring things out.
These worked perfect for my M18 batteries! I ended up using M3x16 button head screws and the M3 T-nut designed by another member ( https://www.printables.com/model/450444-skadis-t-nut-mounting-system-threaded-for-m3-or-un). I didn't end up using the top hole since it wasn't necessary and would require much longer screws.
Fantastic model, 10/10 design for printability, fitment, and appearance.
Great job integrating the t-nut system into an already wonderful concept for battery storage.
Made out of Creality CR series PLA, in black.
Printed top-down, tree supports on the overhangs closest to build plate.
0.2 layer height, fuzzy skin set to 0.1 thickness/0.1 point distance on all surfaces.
Print was actually done on my Anycubic Kobra S1, which still cannot be added to my profile.
Came out looking like something IKEA would sell.
Nice remix. Learned something new as well by using the modifiers.
Printed it with .6mm nozzle for speed, was done in under and hour and feels sturdy enough. Will need to take care with removing and adding batteries, but that is expected.
Thanks for remixing and sharing!
Great stand for the heat press just need to sort the power out and the weight and iron grip im designing (edited)
Fits perfectly and stabilises the table a lot! Thanks for sharing. Only mistake I made while installing, I accidentally switched the bottom pars so the chamfer is on the top now
Do you have the model for the Tool-Check holder?
@TxGnRnr Sorry, i never saw this as i had comment alerts turned off i guess. I uploaded it a while back. here is the link. https://www.printables.com/model/1006623-wera-bit-check-holder-for-toughbuilt-technician-7 Enjoy!
