sorry but the STL file doesnt fit the paint pots they are too small. (edited)
View 2 more comments
@DavidN_2452307 Ahhhh! Now it becomes clear!
I got you with a larger version -- check the updated STL files. :)
@JasnaM_307379 awesome thx
Thank you for uploading the STL, im beeing picky here in saying it would be even nicer to have the STL's individual dinasours. My nefew's dog shredded Stego and now I get to replace the wood meeple with a printed one. I'll post a photo of the meeples once printed in all the colours. Thanks again.
@PrestonColli_2215463
Hi Preston, thanks for the comment.
I didn't post them individually because I can separate models out into individual prints in my slicer. Have you tried that?
If your slicer can't do it, let me know and I'll post separate files for each one.
A standard Battletech map hex is 23.241mm on each side,or 32.9mm from flat to flat. https://imgur.com/a/Va2kqih (edited)
@Strill_451626
Huh. I took some calipers and measured a recent map we have lying around and the side is around 19mm. How did you get the last two values past the decimal point??
In any case, the bases I made will fit within the BT map hexes. Wouldn't want to make them *exactly* the same size as the hex.
@Strill_451626
Thanks for the picture, it helps and wow for the calipers :) Mine are just brass.
Anyway, I measured one of the hexes we printed from the model and it's 30.5mm edge to edge, which would make it 1.200 inches.
In my comment above I think I was referring to the side length of the hex, not the edge to edge distance of the model.
That said, the hexes in the model should fit the map, we just differed in what we were measuring.
@NewHouse3D_1651478 That looks great! Thanks for posting your photo of it, I can't seem to find my photos of the updated version.