The reliable Original Prusa MK4S is now available in discounted bundles with the MMU3 and Enclosure. Grab yours today!
Jan Štech 19
Jan Štech
@JanStech
 published a new model August 14 at 9:37 AM
August 14 at 9:37 AM
Collapsible Wine Glass
  1. Household
  2. Kitchen
32
0
64
Ctrl⌘ + Enter to send Enter to add a new line
Jan Štech 19
Jan Štech
@JanStech
 published a new model August 13 at 12:22 PM
August 13 at 12:22 PM
Bottle Wasp Trap
  1. Household
  2. Outdoor & Garden
1,262
4.8
2,949
3D.genau 13
3D.genau
@3Dgenau

printed in PETG, works instantly! Thank You very much 👍

Reply 2 likes September 1 at 9:01 PM
Bambu Lab X1
Jan Štech 19
Jan Štech
@JanStech

@3Dgenau Good catch. What to use for bait?

Reply 3 likes September 2 at 7:09 AM
3D.genau 13
3D.genau
@3Dgenau

@JanStech i used just Apple juice and some grapes :-)

Reply September 8 at 12:02 PM
Chiapet 9
Chiapet
@Chiapet_1301245

Very useful! Printed this in Prusament PETG Mango Yellow to attract.

Reply 2 likes September 2 at 8:59 PM
Prusa MK3S/S+ & MMU2S/3
Ctrl⌘ + Enter to send Enter to add a new line
Jan Štech 19
Jan Štech
@JanStech
 published a new model August 11 at 1:22 PM
August 11 at 1:22 PM
Camping Badge
  1. Sports & Outdoor
  2. Outdoor Sports
16
0
16
Ctrl⌘ + Enter to send Enter to add a new line
Jan Štech 19
Jan Štech
@JanStech
 published a new model August 9 at 12:05 PM
August 9 at 12:05 PM
Travel Modular Salt and Peper
  1. Household
  2. Kitchen
235
5
305
Javi Cebrián 8
Javi Cebrián
@javi_cebrian_2317523

super nice!

Reply 1 like August 26 at 11:02 AM
Ctrl⌘ + Enter to send Enter to add a new line
Jan Štech 19
Jan Štech
@JanStech
 published a new model July 25 at 9:36 AM
July 25 at 9:36 AM
Membrane Whistle
  1. Toys & Games
  2. Other Toys & Games
41
5
67
Turtle_dude 9
Turtle_dude
@Turtle_2206309

Works great, good quality. No problems

Reply 1 like July 25 at 2:59 PM
Turtle_dude 9
Turtle_dude
@Turtle_2206309

Good quality and it works, thanks!

Reply 1 like July 25 at 3:00 PM
Creality K1
Ctrl⌘ + Enter to send Enter to add a new line
Jan Štech 19
Jan Štech
@JanStech
 published a new model July 25 at 9:36 AM
July 25 at 9:36 AM
Finger Wind Surf
  1. Toys & Games
  2. Other Toys & Games
9
3
134
3d lover 14
3d lover
@3dlover_2357562
Reply 2 likes August 19 at 3:01 PM
Creality Ender 3 V3
proudabbaofa3dlover 0
proudabbaofa3dlover
@proudabbaofa_2372522

@3dlover_2357562 cool!

Reply August 23 at 12:14 AM
proudabbaofa3dlover 0
proudabbaofa3dlover
@proudabbaofa_2372522

@3dlover_2357562 cool!

Reply August 23 at 12:14 AM
Ctrl⌘ + Enter to send Enter to add a new line
Jan Štech 19
Jan Štech
@JanStech
 published a new model July 3 at 10:21 AM
July 3 at 10:21 AM
Phone Holder
  1. Gadgets
  2. Other Gadgets
6
0
24
Ctrl⌘ + Enter to send Enter to add a new line
Jan Štech 19
Jan Štech
@JanStech
 published a new model July 3 at 9:47 AM
July 3 at 9:47 AM
Hourglass - Sand Clock
  1. Household
  2. Home Decor
8
0
9
Ctrl⌘ + Enter to send Enter to add a new line
Jan Štech 19
Jan Štech
@JanStech
 published a new model July 3 at 9:32 AM
July 3 at 9:32 AM
CYKY Cable Holder
  1. Hobby & Makers
  2. Electronics
5
0
16
Ctrl⌘ + Enter to send Enter to add a new line
Jan Štech 19
Jan Štech
@JanStech
 published a new model July 3 at 8:40 AM
July 3 at 8:40 AM
Long Protein Scoop 5ml
  1. Sports & Outdoor
  2. Other Sports
1
0
28
Ctrl⌘ + Enter to send Enter to add a new line
Jan Štech 19
Jan Štech
@JanStech
 published a new post June 17 at 8:52 AM
June 17 at 8:52 AM

Hello. I would like to ask how you deal with your illegal fake accounts on other platforms (makerworld).

Jonas Daehnert 18
Jonas Daehnert
@PhoneDesigner

Had the same problem. I simply wrote an e-mail to support|at|makerworld.com. The fake account was removed within a few hours.

Reply 3 likes June 17 at 9:33 AM
Jan Štech 19
Jan Štech
@JanStech

Thank you. I already created an account and linked it to printables, and the fake account was deleted.

Reply 3 likes June 17 at 10:07 AM
Ctrl⌘ + Enter to send Enter to add a new line
Jan Štech 19
Jan Štech
@JanStech
 published a new model May 14 at 5:19 PM
May 14 at 5:19 PM
Dry Box
  1. 3D Printers
  2. Accessories
22
0
26
knezi 11
knezi
@knezi_1653295

Hi,

I've printed the lower part for testing and it seems to me that friction is too high. Some spools trip over when printing, some don't rotate, the printer can't home Z axis (e. g. Going fast down) without me manually pulling the Filament.

Does anyone know what to do with this? E. g. Low quality bearings, threaded rod is not suitable for this...

Reply September 28 at 7:53 AM
View 2 more comments
Jan Štech 19
Jan Štech
@JanStech

@knezi_1653295 According to the photo, it looks like the free end of the filament could interfere with the rotation. threaded rods could also be a problem. try wrapping the rods with tape or something similar at the contact points of the coils and threaded rods

Reply September 29 at 12:16 PM
knezi 11
knezi
@knezi_1653295

@JanStech the free end is the one that gets loaded into the printer.
Yep, I've tried wrapping them in electrical tape, didn't help.
I've printed this and it's better. I think all the spacings in your model may a bit too tight. (spool width, bearings width, cutout for the rods).

I can print successfully, but still get "collision detected" when homing Z. It homes, bur after a lot of up and down moves.

Reply September 30 at 2:07 PM
knezi 11
knezi
@knezi_1653295

Great idea! Will surely make some.

Reply 1 like August 7 at 8:16 PM
Ctrl⌘ + Enter to send Enter to add a new line
Jan Štech 19
Jan Štech
@JanStech
 published a new model May 13 at 6:14 AM
May 13 at 6:14 AM
JBL Cover
  1. Gadgets
  2. Audio
25
0
106
Julius 18
Julius
@Julius

have not tested with audio yet, but it fits.

Reply 1 like June 7 at 5:33 PM
Prusa MK3/S/S+
Ctrl⌘ + Enter to send Enter to add a new line
Jan Štech 19
Jan Štech
@JanStech
 published a new model May 5 at 12:40 PM
May 5 at 12:40 PM
Zip Tie
  1. Hobby & Makers
  2. Tools
1,317
4.3
2,488
LL-3d 16
LL-3d
@DungPhan_985233
Reply 1 like September 29 at 4:29 PM
Elegoo Neptune 4 Pro
Freezerr 10
Freezerr
@Freezerr_1712134

Easy to print and works fine until now

Thanks for the design

printed with PETG(white)

Reply 2 likes May 27 at 6:27 PM
Bambu Lab P1S
Ctrl⌘ + Enter to send Enter to add a new line
Jan Štech 19
Jan Štech
@JanStech
 published a new model April 22 at 8:08 AM
April 22 at 8:08 AM
510 Drip Tip
  1. Gadgets
  2. Other Gadgets
10
5
130
Bomber 14
Bomber
@Bomber_1185790

Works for me

Reply 1 like August 21 at 6:44 PM
Bambu Lab X1
Ctrl⌘ + Enter to send Enter to add a new line
Jan Štech 19
Jan Štech
@JanStech
 published a new model April 15 at 3:34 PM
April 15 at 3:34 PM
NSFW
Fallout Vault Boy Keychain
  1. Art & Design
  2. 2D Plates & Logos
22
3
45
CannaCreator 23
CannaCreator
@CannaCreation
Reply 1 like May 4 at 9:51 AM
Prusa MK4
Tate Doyen 5
Tate Doyen
@TateDoyen_2058117

First one (left one) I used the original size with .4 nozzle and the recommended .25 layer. After some resizing to the model and really playing with the z model height and changing to a .25 nozzle with .1 layers the one on the right was my end result and really happy with that one. Thanks for the model not click and print ready yet, at least not for me

Reply 1 like June 26 at 3:43 AM
Creality Ender 3
Ctrl⌘ + Enter to send Enter to add a new line
Jan Štech 19
Jan Štech
@JanStech
 published a new model March 23 at 8:38 AM
March 23 at 8:38 AM
Sewing Kit
  1. Hobby & Makers
  2. Tools
100
4
208
Honza 21
Honza
@Honza
Reply 1 like March 31 at 1:19 PM
Prusa MK4
Axel L-T 8
Axel L-T
@AxelLT_81144
Reply 1 like August 27 at 12:15 PM
Prusa MINI / MINI+
Ctrl⌘ + Enter to send Enter to add a new line
Jan Štech 19
Jan Štech
@JanStech
 published a new model March 6 at 6:24 PM
March 6 at 6:24 PM
French Rulers
  1. Hobby & Makers
  2. Tools
186
5
457
jancikoas15 22
jancikoas15
@jancikoas15
Reply 1 like April 7 at 2:55 PM
Elegoo Neptune 4 Pro
Emu 10
Emu
@Emu74_355983
Reply 1 like October 2 at 1:02 PM
Prusa MK4
Ctrl⌘ + Enter to send Enter to add a new line
Jan Štech 19
Jan Štech
@JanStech
 published a new model March 4 at 7:40 PM
March 4 at 7:40 PM
The Smallest Whistle
  1. Toys & Games
  2. Other Toys & Games
2,698
4.8
14,480
Ryan2426 9
Ryan2426
@Ryan2426_1784567

My girlfriend keeps throwing them out and I just keep printing more. 10/10

Reply 4 likes March 16 at 4:35 AM
Creality Ender 3 V3 KE
clay 8
clay
@clay_191338

5 stars for a simple model. 1 star since i'm an idiot and printed one for my kid

Reply 7 likes March 27 at 11:34 PM
Prusa XL
Ctrl⌘ + Enter to send Enter to add a new line
Jan Štech 19
Jan Štech
@JanStech
 published a new model March 2 at 7:09 PM
March 2 at 7:09 PM
18mm Utility Knife
  1. Hobby & Makers
  2. Tools
491
4.9
1,267
756boo 3
756boo
@756boo_554637

Printed in PETG
Scaled small parts 98%

Cut out the U shaped bend in the cap

Used candlewax to lubricate the mechanism, made it move SO much smoother.

Reply 2 likes April 27 at 6:13 AM
Prusa MINI / MINI+
vic_awesome 8
vic_awesome
@vic_awesome_653400

why dose this make not have 10,000 downloads?
lol

Reply 3 likes March 2 at 7:55 PM
Ctrl⌘ + Enter to send Enter to add a new line