James Brown 6
James Brown
@JamesBrown_1807641
published a new model December 7, 2024 at 12:59 PM
December 7, 2024 at 12:59 PM

Please can you share the STL of this project? I have troubles slicing the 3mf

@altacry_783674 Sorry to hear that.
I'm afraid I won't be able to upload the STL until I'm back home after the Christmas holidays - but I shall do so then!

I like the model a lot. Not easy to print on MK2.5S - need to use adhesive (3Dlac), ironing and after print bit of sanding and hot air to get rid of stringing.
These ones printed on 120% scale.

@PeterChnurik_2542673
I love the red and white! 😍 Thank you for sharing!
Sorry to hear of adhesion issues, I normally print with brims as default - I should probably update the description

@JamesBrown_1807641 - Ipm still beginner in 3D printing. I shall be wrong. This model never releases from heatbed, just some edges. 3Dlac is quite cheap, repetable usable - solves the issue.
I can not imagine to remove brim from very fine model like this one. Better to play with printer setup and tune first layer adhesion.

Ctrl + Enter to send Enter to add a new line
James Brown 6
James Brown
@JamesBrown_1807641
published a new model February 17, 2024 at 11:04 PM
February 17, 2024 at 11:04 PM

A beautiful LED diffuser that prints surprisingly easily considering it's complex shape. Printed in 0.2mm layer height with automatically painted organic supports, used Recycling Fabrik rPLA Flauschiges Schaf.
The included clip did not fit my LEDs, so I remixed a new, smaller adapter.

@starfetcher_1566324
Fantastic! Thank you so much for sharing your make and your remixed adaptor!
I wanted to try and make a "universal" adaptor - but didn't want to have to go and buy a load of different fairy lights to check! So really happy to see some adaptors.

Do you mind if I include link to your remix in my description here? And on the model page on makerworld and thanks as well?

@JamesBrown_1807641
Thank *you* for your excellent model! And of course, it would be an honour to be mentioned, so go ahead :)

Ctrl + Enter to send Enter to add a new line
All items loaded