Works great, would recommend printing these.
Nice project and well designed! I had no issues while building! The .json files for the WLED installation are quite convenient.
However, I did miss a wire management on the back and a place to hold the ESP32. Therefore I made a wire guide and ESP holder to mount on the backside without raising it too mucht from the wall ( https://www.printables.com/model/918471-esp-and-cable-guide-for-prismlume)
Amazing model! Thank you very much.
Unfortunately, it didn't fit my Ender 3 bed (230x230) so I had to make a smaller version: https://www.printables.com/model/844674-prismlume-small-and-medium-version/files (edited)
The design is really cool, but printing it is a pain. In the end, it turned out alright but fit was very tight. Even with the "high tolerance" parts, I had to do a lot of filing.
Nice model and instructions! I reversed the fan and enclosure to expose my fan's a bit more than it was with the normal direction. Used PETG. One star is missing only because the fan cover isn't fitting well for me and the filter grids are easy to push in when gripping the whole thing.
@CB_1731793 Can you post your remixed fan cover?
I really like the simple and straightforward design and the good build guide! <3
Only thing is that the top cover will not stick/click very well.
Did a little modification with an usbconnector, battery and opened the back for more airflow.
And would really love to see a 120mm version of this one.
Simple and beautiful printing on the Prusa XL with 5 extruders - nice idea as a little Easter surprise
@katisnekreative danke.
Ja, das ist tatsächlich das "Big Slingshot Projectile" auf dem Modell https://www.printables.com/model/801385
Hatte ich gerade rumliegen xD (edited)
