Very solid
Printed great!! Now I’m just waiting on the MagSafe magnets to get here.
Case printed with 3DTrcek FLEX and for camera with PETG.
Iphone 15 pro max fits prfectly into case.
@ravny_728999 Hi,please do you have a gcode for MK4? I am a beginner in 3D printing and not shure set up all settings properly. Thank youuu.
Outstanding design with lots of options! Well done.
I highly recommend utilizing an ironing function on the final surface. you may need to add 1-2 final layers prior to ironing to ensure you don't melt the infill design into the top layer
Also because the phones can be heavy, print at +50% infill and triangle design for weight in the base alone.
Phone & Watch base printed in Wood PLA & turned out perfect! (edited)
Fantastic model! Printed the standard tolerance “large” models for my iPhone 15 Pro Max and watch series 8. Holders are perfectly snug on both MagSafe pucks, and the wire runs are just sublimely sized for holding the wires snugly.
Printed in transparent Bambu PETG Basic with the following settings:
- 0.1mm layer height
- 0.5mm line width
- 2 wall loops
- 20% Archimedean chord infill
- Archimedean chord top surface pattern
- 50mm/s print speed
Very please with how the translucent spiral effect came out in the end result. Just under 11 hours total print time. I had considered trying 100% rectilinear infill and bottomed out 20mm/s print speed for a significantly more transparent result, but wasn't all that keen on a 250g print with 24+ hour print time.
printed this for a coworker and she absolutely loves the simplicity of it. Keep up the good work.
Printed this ice scooper with Geeetech Silk PLA. It was much bigger than expected. The whole thing filled my Bambu X1C plate horizontally with brim and support. Looks clean. Printed with 4 walls for more strength at .16
Nice scoop! Will use it for scooping horse food. Great size. Printed in PLA Tough.
This worked perfectly! All the other mounts I found were either too complicated or did not fit my phone (Pixel 6 with bulky case). I did not need to change the scale or anything. I printed this for having a convenient spot in the shower to hang my phone and play music.
@Harbor_Freight Glad it works for you. Thanks for downloading!
Excellent! Holds phone horizontally or vertically. Mounted with water resistant command strips
@g00n Thanks for the rating!
Printed with pla+ 0.4 nozzle, 0.2 wall height, 3 walls, 15% cubic adaptive infill (10% is probably enough). Fits perfectly and looks great. (edited)
Perfect design and printing, well done! Compatible with the black "MagEase" induction charger found on amazon. (edited)