Gift/toy for daughter
Thanks for sharing your Make!
I want to like this one so bad but every print I do, I break the buckle off when trying to break it free (flat) after printing. I get the rest of the links to break free but that one I just can't get it without breaking it off. Is there any way to get some STLs with the buckle laying down? I don't have a problem using tree supports for it if I need to. (edited)
View 2 more comments
@DanielZimmerli Let me know how it turns out. 😃
@Grandpa3DPrints that seemed to help. tolerances are much better for me. I don't blame you or anyone who designs things like this. my disappointment was my of my own hardware/settings. Thanks for the bracelet!
(click the image, it's a GIF)
Did you ever play with those chain reaction domino sets as a kid? Well I've created print in place dominoes that can be knocked over and then quickly reset by tilting them! Rube Goldberg anyone?
https://www.printables.com/model/1129204
WOOW dude i've been trying to remember what them was called forever now ,especially when i'm looking for xmas gifts for my kids.
Do you know the name of this?
View 2 more comments
@Raymond That didn't take long at all! 😁
My program also confirmed that there is only one solution, with 16 radial sums of 40.
I think I am printing these all wrong. Each piece is two colors?
View one more comment
@KristiStrick_1871463 I'm extremely sorry! I don't know how I missed your comment! This print does not require a multicolor printer, but you do have to insert a filament change (a pause) during the print to swap filament colors manually. Let me know if you need any more help, and I'll be glad to offer any assistance that I can!
@PilboMags_582331 I don't know how I missed that comment because I try to reply to all comments. This print does not require that you have a dual color printer. You just have to use a pause during the print and swap colors manually. I hope this helps! 😃
PS5 controller stand. PLA )Geeetech silk silver, .22mm, no supports, 3 wall loops, Orca Slicer.
Thanks for sharing your Make!
Thanks for sharing your Make! 😁
Super Star is having an identity crisis! Can anything be a Christmas ornament if you add an ornament hook?
https://www.printables.com/model/1115280
0%
0%
0%
22 votes | Final results
Thanks for sharing your Make!
Fun little decoration!
Printed in Galaxy Red + Green first, but didn't really like it. So printed it again in Galaxy Silver + Black
They both look great! Thanks for sharing your Make!
@Kady3DPrintin_178814 Thanks for sharing your Make!
I know it says to use the default settings- but what are they?
@BizzyB_1284839 Of course! I more or less meant any settings should work. Try these: 2 walls, 15% rectilinear infill, 5 top and bottom layers, 0.2mm layer height.
Let me know if that helps!
Printed with Prusament PLA Prusa Galaxy Black. Works well and spins freely.
Thanks for sharing your Make!
Thank you for the nice toys, I have printed them as Christmas gifts for my daughter's schoolmates.
@Zoid 🎅🧡👍 Thanks for sharing your Make!
You spin me right round, baby, right round
https://www.printables.com/model/1080329
Like a record, baby, right round, round, round ♪~
Really fun design, stands up well and holds phone with stability. (edited)
@AustinPritch_1922208 Thanks for sharing your Make! :)
Do you also have the file for the tree?
@AmandaDeWitt_2515293 Hey 👋 I haven't created a nice base/stand for it yet. I figured my test print would make a nice display for some photos 😉
I've had requests from family and friends to create some little handheld fidget clickers, and now I can't stop! They're just so CLICKY!
https://www.printables.com/model/1037886
it sure is!
cool i just got a spool of orange filament for spooky season!
Do you know if a Cherry MX style switch would fit? Thank you! (edited)
@SG_159434 I have been looking online and comparing measurements. It looks like there are some Cherry switches that might fit while some may be about 1 to 2 mm too tall. That is something that I could easily adjust if they don't fit. I plan on ordering some Cherrys to test. Please let me know if you have a chance to print this version for a test fit! :)
@Grandpa3DPrints Thanks for checking! I can definitely print it and test the fit. I have a few different cherry style switches I can try but they are all the same dimensions. None are low-profile so maybe they're the ones that are a bit too tall. I can take some measurements too if it would help. Thanks again!
This was a very fun print! I’m printing a bunch to hand out on Halloween with the candy… thanks as always for sharing your awesome design!
@BetsyWeber Thanks Betsy! 🎃
Could you make a version for bic mini lighters as well?
Thanks for sharing your Make!