I scaled up 155%. Model still locks well. Very happy with the box.
The "ball" really needs to be made with 5+ walls.
The feet retention bit doesn't hold well, likes to fall off.
The ball retention doesn't grab well, needed to add cloth padding to work.
The pins are too small, had to use proper M5x16 screws to hold the legs.
Top heavy.
All in all, a decent model.
Tip for the creator: seperate your "just for reference" files from the actual files
Thanks for the feedback, it will be valuable for the next version!
Regarding the reference file, I tried separating but printables doesn't allow uploading a folder or a zipped file(at least at the time), so I had to compromize.
I made this, it looks good but I am having some trouble with fitment. It doesn't seem to accept the bayonet affordances on the viewing lens and won't rotate to lock onto the taking lens. I'll compare to a manufactured one and see if I can find out where the issue is. This is a Bay 1 camera, interchangeable w Rollei, so it should fit.
@Paulbeard_1209771 Do that! It's hard to diagnose otherwise, something might be obstructing the lens cap that isn't present on the rollei's I have.
I believe you, but there might still be differences. I hade an earlier version that only worked on earlier bay 1 cameras due to the later versions having shutter and aperture dials between the lenses that collided with the lens cap.
@FredrikHamrebjorkDes They look quite different, now that I compare them. The part that mates with the bayonet is much broader on the one designed for the Yashica. That may be the chief difference, the more firm latching from that extra material. Yours like nicer on the outside, I like the little dot that helps get it placed properly. I think my needs are met by the other one but if you want to test anything to make this a more universal fit, let me know.