Erik 17
Erik
@Erik_504861
 published a new model December 2 at 7:09 PM
December 2 at 7:09 PM
Lid for standard 68.2mm can (140/150g)
  1. Household
  2. Kitchen
2
0
6
Ctrl⌘ + Enter to send Enter to add a new line
Erik 17
Erik
@Erik_504861
 published a new model August 26 at 4:33 PM
August 26 at 4:33 PM
EV Charge cable holder for long cables - with removable divider for easy cable managment (Update: Also a Slim version)
  1. Household
  2. Garage
2
5
36
Luca 12
Luca
@Luca_71466

I printed it with PETG - after using it a couple weeks I have some suggestions:

1. the holder is protruding too much from the wall. I would reduce the Y length to half. As it is, the cable spires are catched into the rear mirror.
2. the charger connector holder doesn't fit my Volvo cable connector, I suggest doing a conical funnel to fit hold most Type 2 connectors
3. the holes for the screws need to be less deep: I needed a very long screw to reach the D 8mm plug and pull it
4. I would have three screws to make a traingle, it would hold more firmly.

Anywas, thanks!

Reply 1 like November 15 at 11:48 AM
Prusa MK3/S/S+
View 2 more comments
Luca 12
Luca
@Luca_71466

@Erik_504861 Hi Erik, amazing! I had already started a Fusion project but you were faster, thank you!!!

I will print it asap. Are the 2 lower holes at the same interaxis? That would avoid drilling new holes ;-)

Reply November 26 at 6:38 PM
Erik 17
Erik
@Erik_504861

@Luca_71466 no problem! I hope it works out, as I haven’t tested it. The two lower holes are identical with the previous version (should be) as I haven’t done anything to that part.

Reply November 26 at 9:20 PM
Ctrl⌘ + Enter to send Enter to add a new line
Erik 17
Erik
@Erik_504861
 published a new model May 26 at 2:22 PM
May 26 at 2:22 PM
Bosch Miter Saw modular vacuum attachment (Parametric, with STEP file)
  1. Hobby & Makers
  2. Tools
1
0
17
Ctrl⌘ + Enter to send Enter to add a new line
Erik 17
Erik
@Erik_504861
 published a new model May 18 at 10:46 AM
May 18 at 10:46 AM
Flag holder for Flower Pots
  1. Household
  2. Other House Equipment
0
0
6
Ctrl⌘ + Enter to send Enter to add a new line
Erik 17
Erik
@Erik_504861
 published a new model May 17 at 6:16 PM
May 17 at 6:16 PM
Wall mount for PickAxe with STEP file included
  1. Hobby & Makers
  2. Tools
1
0
9
Ctrl⌘ + Enter to send Enter to add a new line
Erik 17
Erik
@Erik_504861
 published a new model May 14 at 7:17 PM
May 14 at 7:17 PM
Wheel block
  1. Hobby & Makers
  2. Tools
5
0
29
Ctrl⌘ + Enter to send Enter to add a new line
Erik 17
Erik
@Erik_504861
 published a new model May 9 at 7:37 PM
May 9 at 7:37 PM
Ryobi One+ Electric Planer wall mount
  1. Hobby & Makers
  2. Tools
10
5
53
M 18
Miketru
@Miketru_1681804

Fits perfectly! Love it (edited)

Reply 1 like May 11 at 1:40 AM
Creality K1
Erik 17
Erik
@Erik_504861

@Miketru_1681804 thanks for the make! Glad you like it!

Reply May 11 at 8:06 PM
Ctrl⌘ + Enter to send Enter to add a new line
Erik 17
Erik
@Erik_504861
 published a new model May 4 at 7:03 PM
May 4 at 7:03 PM
Dremel Wall mount. Update: new version added
  1. Hobby & Makers
  2. Tools
3
0
25
Ctrl⌘ + Enter to send Enter to add a new line
Erik 17
Erik
@Erik_504861
 published a new model May 4 at 11:14 AM
May 4 at 11:14 AM
Black and Decker 14.4V battery charger Wall mount
  1. Hobby & Makers
  2. Tools
1
0
4
Ctrl⌘ + Enter to send Enter to add a new line
Erik 17
Erik
@Erik_504861
 published a new model May 3 at 5:52 PM
May 3 at 5:52 PM
Wall mount for Drill - Left and right facing version
  1. Hobby & Makers
  2. Tools
5
0
26
Ctrl⌘ + Enter to send Enter to add a new line
Erik 17
Erik
@Erik_504861
 published a new model May 1 at 7:26 PM
May 1 at 7:26 PM
Black and decker Drill Battery holder (14.4V)
  1. Hobby & Makers
  2. Tools
5
0
21
Ctrl⌘ + Enter to send Enter to add a new line
Erik 17
Erik
@Erik_504861
 published a new model April 30 at 9:52 AM
April 30 at 9:52 AM
Ryobi One+ Tool Shelf with tray for accessories - added test model for your tools
  1. Hobby & Makers
  2. Tools
7
5
30
GigiGarage 19
GigiGarage
@GigiGarage

Tutto si adatta perfettamente, stl ok tutto senza supporti

Reply 1 like May 19 at 4:36 PM
Bambu Lab P1S
Ctrl⌘ + Enter to send Enter to add a new line
Erik 17
Erik
@Erik_504861
 published a new model April 30 at 9:43 AM
April 30 at 9:43 AM
Ryobi One+ Orbital sander Wall mount
  1. Hobby & Makers
  2. Tools
9
0
55
Ctrl⌘ + Enter to send Enter to add a new line
Erik 17
Erik
@Erik_504861
 published a new model April 9 at 12:45 PM
April 9 at 12:45 PM
Round vase
  1. Household
  2. Living Room
0
0
7
Ctrl⌘ + Enter to send Enter to add a new line
Erik 17
Erik
@Erik_504861
 published a new model January 28 at 11:33 AM
January 28 at 11:33 AM
Updated: Painters tray with removable cups. Free hanging, and now also with screw in place!!
  1. Hobby & Makers
  2. Tools
8
5
58
Leavingthelegacy 16
Leavingthelegacy
@Leavingthele_1563994

My kids love this

Reply 1 like February 9 at 2:44 AM
Flsun V400
Erik 17
Erik
@Erik_504861

@Leavingthele_1563994 Thanks for comment! Glad your kids liked it :)

Reply February 9 at 5:57 AM
Ctrl⌘ + Enter to send Enter to add a new line
Erik 17
Erik
@Erik_504861
 published a new model January 20 at 11:28 AM
January 20 at 11:28 AM
Braun Series 9 Beard trimmer tray/holder
  1. Household
  2. Bathroom
8
0
47
Berry00 12
Berry00
@Berry00_446724

Hi Erik, could you Share the CAD Data to modify your design? :-)

Reply 1 like July 18 at 9:22 AM
Erik 17
Erik
@Erik_504861

@Berry00_446724 Sure thing! I added the STEP-file :)

Reply 1 like July 19 at 3:50 AM
Berry00 12
Berry00
@Berry00_446724

@Erik_504861 awesome! Thanks a lot! 😃

Reply 1 like July 19 at 5:39 AM
Ctrl⌘ + Enter to send Enter to add a new line
Erik 17
Erik
@Erik_504861
 published a new model January 13 at 1:02 PM
January 13 at 1:02 PM
Combined LED remote- and headphone holder
  1. Household
  2. Office
2
0
13
Ctrl⌘ + Enter to send Enter to add a new line
Erik 17
Erik
@Erik_504861
 published a new model January 10 at 6:54 PM
January 10 at 6:54 PM
Cable holder for IKEA Malm desk
  1. Household
  2. Office
2
0
17
Ctrl⌘ + Enter to send Enter to add a new line
Erik 17
Erik
@Erik_504861
 published a new model December 30, 2023 at 8:08 PM
December 30, 2023 at 8:08 PM
Twisting Cog - Vase/Pen holder
  1. Household
  2. Other House Equipment
1
0
20
Ctrl⌘ + Enter to send Enter to add a new line
Erik 17
Erik
@Erik_504861
 published a new model December 19, 2023 at 11:50 AM
December 19, 2023 at 11:50 AM
Universal clips - for round and square bars. Easily scalable
  1. Household
  2. Other House Equipment
5
0
50
Ctrl⌘ + Enter to send Enter to add a new line