Good tray, fits well, printed in black ASA with zero issues. It didn't work for me as I was looking for a sliding one but that's on me not the maker. 5 stars
@kitlaan Happy you like it! Thanks for sharing! :-)
I was tired of seeing the temp read out of 130º and realize that I still had not found a place the sun wouldn't hit my outdoor temperature sensor. So far this thing works great! Printing in white ABS and glued together with E6000. (edited)
@SkyJetty_588657 Thanks a lot for sharing!
This is a really nice idea. Are you able to tell me the dimensions in mm? It prints small and I tried to resize but I’m slightly off
Just what I needed to hold my soaps in the shower, it printed great. Added the TPU feet aswell for extra grip on the tiled surface.
Used eSUN Grey PETG with 50% gyroid infill which gave it a nice weight and felt very sturdy. Overture Black TPU 95 for the feet with 15% cubic infill so they were squashy.
Rotated it on its back to print so the trays printed up. Turned out good 10% infill on AnkerMake M5 with Overture PETG. Plan to mount with "shower" 3M command strips. (edited)
I printed the 3D model of a battery-shaped recycle bin and wanted to share my feedback on the experience.
The model printed beautifully, and I only needed standard supports for the top lid, which worked perfectly.
I used three different filaments for this project: copper, black, and silver, and the results were fantastic.
The colors blended well and added a realistic touch to the final product.
All parts of the model fit together seamlessly, showcasing the precision of the design.
The assembly was straightforward, and everything aligned perfectly without any adjustments needed.
Thank you for sharing this excellent design!
It’s both functional and visually appealing, and I’m excited to use it as a unique recycle bin.
@YoPrint3_760937 Thanks for your nice feedback! Happy you liked it!
Es wurde alles mit schwarzen Filament (PLA+ von SunLu) gedruckt und dann später lackiert.
Dementsprechend ist das Ergebnis natürlich nicht so perfekt als wenn man das entsprechendfarbige Filament nimmt.
Den "Kopf habe ich mit dem Loch nach unten und Support für die Vertiefung gedruckt.
Der Rest kam ohne Support aus.
Es passt alles gut zusammen.
Vielen Dank
---------------------------
Everything was printed with black filament (PLA+ from SunLu) and then painted later.
As a result, the result is of course not as perfect as if you use the corresponding coloured filament.
I printed the "head" with the hole facing downwards and support for the recess.
The rest was done without support.
It all fits together well.
Thank you very much
@FreundderNach_863944 Thanks for the feedback! :-)