Hi, when I want to slice this model in Cura it reports error: no models in file. Should I use different slicer or the file is corrupted?
View one more comment
@Djsprints_1671703 After some failed attempts, I solved it by downloading the original model and cut it to the shape like you did. I don't know what happens to the project file tho, maybe version issue cause generally speaking they should all support 3mf files.
@MingyuanXia_1701621 No idea. I highly recommend switching to Orca Slicer though. I used Cura for like a week, Orca is way better
Could the originator very kindly add an stl file to the project please ? I too am unable to get this to work using Cura and I fnd Orca to be completely obnoxious... (edited)
This remixed model shortens the height of the print from 12.23mm down to 11mm, just FYI.
Thank you for this! These are good files. A suggestion and insight for others: Please provide instructions. Some are new to this and have no idea what they are doing. It may help your files get more traction as well.
I printed in PETG, and it took approximately 20 minutes with Orca slicer and in sport mode on the Elegoo N4M.
Instructions:
1. Remove the PEI bed
2. Remove the existing bracket and screws.
3. To remove the bracket, remove 2 small screws from the bed and unclip the zip ties holding the bracket.
4. Fit the alignment tabs accordingly.
5. For the left tab, you will use the base of the bottom OEM bracket.
6. Place the screws back accordingly.
