Printed in PETG.
I attached it to my AMS adaptor, works great and I finally have a place to keep my scrapper
We needed some trophies for a baby shower competition, and these worked perfectly for that.
This is a fabulous remix to reduce the amount of bearings required. Thank you!
Great remix. Will need all of the parts from the original design barring the outer bearing covers. Works great and a very helpful remix from the original.
What screws are used to attach this
@Matthew_42546 just use the ones that are already in the printer. Unscrew them and reinstall them with the cable guide.
@Denitz Thanks
Thank you! I particularly like the design's look
@bigben7911 looks awesome!
@Denitz Thanks!!. It made an awesome side gift with Kindle for my girl. :) (edited)
Forgot to post before pimping it 😅
Printed in vertical of course, with a huge 20mm brim and longer side on the Y axis.
The Kindle slips out easily so I added a strap of velcro; it would be awesome to have something like a snap fit!
Very smart design.
Perfect fit on those OEM rubber-feet.
Very useful and space saving addon for nearly everthing you have to use when printing.
Thanks alot for sharing.
Printed in Sunlu PLA+ Black
0.2mm Layer Hight
3 Perimeters and 10% Gyroid Infill
Printed for my Son. I will post the parts separately. Here are the small one + the perfect fitting box for it.
Thanks a lot for designing and sharing.
Very smart design.
Perfect fit on those OEM rubber-feet.
Very useful and space saving addon for nearly everything you have to use when printing.
The little red box also fits absolutely perfect.
I'am using the box for all of the tiny sanding paper rest pieces which always laying around everywhere on my table. :-)
Printed in Sunlu PLA+
0.2mm Layer Hight
3 Perimeters and 10% Gyroid Infill for storage 2 Perimeters for the box. (no infill needed)
